cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
190
Views
5
Helpful
7
Replies
Beginner

c3560x interface status is inaccurate

we have a we-c3560x-24p switch with version 12.2 (55) SE5 that was off our network for a few years and we connected it back up to the network but it shows that there are a few devices connected to it but there is only 1 SFP connected in the G1/1.  And even that is wrong when we do a 'show interface status'.  It shows no connected.  How do i resolve this?  Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Advisor

Re: c3560x interface status is inaccurate

i do see interface connected Gi1/1 connected trunk a-full a-1000 1000BaseSX SFP

Glad you have resolved the issue.

BB
*** Rate All Helpful Responses ***
7 REPLIES 7
Enthusiast

Re: c3560x interface status is inaccurate

reset switch. delete all but .bin file like vlan.dat file in flash. erase start up config and reload.
VIP Advisor

Re: c3560x interface status is inaccurate

if the switch was used before since long, suggest to reset configuration to factory and configure as per the network requirement.

 

if still now working post configuration and how you connected to uplink switch or devices ?

 

BB
*** Rate All Helpful Responses ***
Beginner

Re: c3560x interface status is inaccurate

deleted everything except for the .bin file and rebooted.  I still get the same status.  what next?

VIP Advisor

Re: c3560x interface status is inaccurate

can you post below output from the device. how switch connected to other device and what ports

show ver

show run

dir

BB
*** Rate All Helpful Responses ***
Beginner

Re: c3560x interface status is inaccurate

this is my 2nd time doing this and these are the configs prior to me reinstalling my old running configs.

Beginner

Re: c3560x interface status is inaccurate

thanks for responding but I got it figured out.  Thanks all!

VIP Advisor

Re: c3560x interface status is inaccurate

i do see interface connected Gi1/1 connected trunk a-full a-1000 1000BaseSX SFP

Glad you have resolved the issue.

BB
*** Rate All Helpful Responses ***
Content for Community-Ad
August's Community Spotlight Awards