1. Download the latest C819 IOx image from CCO, and put it in an SCP path or http path.
2. Download it to C819 through scp or http.
819#copy scp://cisco@hostname.cisco.com//tmp/c800-universalk9_iox-mz.SPA.155-1.T1.bin flash:
Destination filename [c800-universalk9_iox-mz.SPA.155-1.T1.bin]?
Password:
Sending file modes: C0644 60490692 c800-universalk9_iox-mz.SPA.155-1.T1.bin
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[NOTE]: use "copy http://hostname.cisco.com/c800-universalk9_iox-mz.SPA.155-1.T1.bin flash:" to download the image through http.
3. After download the image to flash of C819. Run below to boot the C819 from the image:
819#conf t
Enter configuration commands, one per line. End with CNTL/Z.
819(config)#boot system flash c800-universalk9-mz.SPA.155-1.T1.bin
819(config)#^Z
819#write memory
Building configuration...
WLAN_AP_SM: Config command is not supported
[OK]
819#reload
Proceed with reload? [confirm]
I'm missing something ridiculous, I must be. But this does not work for me on my C819HG-4G.
Sol819#dir flash:
Directory of flash:/
1 -rw- 68468172 Jan 2 2015 20:01:38 +00:00 c800-universalk9-mz.SPA.153-3.M4.bin
2 -rw- 67950216 Jan 2 2015 20:14:22 +00:00 c800-universalk9-mz.SSA.eng-sp-153-3M-LTE
3 -rw- 3071 Jan 2 2015 20:15:54 +00:00 cpconfig-8xx.cfg
4 drw- 0 Jan 2 2015 20:16:22 +00:00 ccpexp
245 -rw- 2464 Jan 2 2015 20:18:20 +00:00 home.shtml
246 -rw- 87131176 Apr 18 2015 17:54:08 +00:00 c800-universalk9-mz.SPA.155-2.T.bin
1025572864 bytes total (796753920 bytes free)
#show running-config
boot-start-marker
boot system flash c800-universalk9-mz.SPA.155-2.T.bin
boot system flash
boot-end-marker
The router just keeps booting into 153. Do I need to remove the old image...??
GAH!
Yeah, so as I said, something really simple...
#conf t
(config)#config-register 0x2102
Brand new router.
I had to do the following:
819(config)#boot system flash flash:c800-universalk9-mz.SPA.155-1.T1.bin