cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

140
Views
1
Helpful
2
Replies
Highlighted
Cisco Employee

NCS 3.4.1 installation issue

I have  a install issue with  the NCS 3.4.1. The  install seems  okey  but  the  startup execution  is sending  error  . Any idea or suggestion ?

Here  the details :

cisco@plb-ncs:~$ sh

$ ./ncs-3.4.1.linux.x86_64.installer.bin ncs34

INFO  Using temporary directory /tmp/ncs_installer.3382 to stage NCS installation bundle

INFO  Unpacked ncs-3.4.1 in /home/cisco/ncs34

INFO  Found and unpacked corresponding DOCUMENTATION_PACKAGE

INFO  Found and unpacked corresponding EXAMPLE_PACKAGE

INFO  Generating default SSH hostkey (this may take some time)

INFO  SSH hostkey generated

INFO  Environment set-up generated in /home/cisco/ncs34/ncsrc

INFO  NCS installation script finished

INFO  Found and unpacked corresponding NETSIM_PACKAGE

INFO  NCS installation complete

$ source ~/ncs34/nscrc

sh: 2: source: not found

$ exit

cisco@plb-ncs:~$ source ~/ncs34/ncsrc

cisco@plb-ncs:~$ cd

cisco@plb-ncs:~$ ncs

Bad configuration: /home/cisco/ncs34/etc/ncs/ncs.conf:0: "./state/packages-in-use: Failed to create symlink: no such file or directory"

Daemon died status=21

cisco@plb-ncs:~$

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: NCS 3.4.1 installation issue

It appears you’ve installed NCS locally and then just tried to run NCS. NCS requires a run directory to start it up. NCS is largely complaining you haven’t created one. I suggest taking a look at the getting started guide present under the doc directory of the installation.

View solution in original post

2 REPLIES 2
Cisco Employee

Re: NCS 3.4.1 installation issue

Looks like you have not set up a project, e.g. "ncs-setup --dest ../ncs-projects/<....> --ned-package cisco-iosxr”.

Cisco Employee

Re: NCS 3.4.1 installation issue

It appears you’ve installed NCS locally and then just tried to run NCS. NCS requires a run directory to start it up. NCS is largely complaining you haven’t created one. I suggest taking a look at the getting started guide present under the doc directory of the installation.

View solution in original post

Content for Community-Ad
FusionCharts will render here