Cat6kにおいて、InterfaceModuleによってEtherChannelのLoad値に違いがあるようですが、これはInterfaceModuleの動作仕様という理解が正しいでしょうか。
当該状況についてManualを確認いたしましたが明記されている資料が確認できませんでした。
例えば、以下のModuleの場合のsh etherchannel detail出力を抜粋いたします。
(WS-X6848-GE-TX)
Port-channel: Po1
------------
Age of the Port-channel = 1464d:06h:38m:38s
Logical slot/port = 46/3 Number of ports = 2
GC = 0x00000000 HotStandBy port = null
Port state = Port-channel Ag-Inuse
Protocol = -
Port security = Disabled
Fast-switchover = disabled
Load share deferral = disabled
Ports in the Port-channel:
Index Load Port EC state No of bits
------+------+------------+------------------+-----------
0 FF Gi1/1/48 On 8
1 FF Gi2/1/48 On 8
(VS-SUP2T-10G)
Port-channel: Po100
------------
Age of the Port-channel = 1464d:06h:38m:38s
Logical slot/port = 46/1 Number of ports = 2
GC = 0x00000000 HotStandBy port = null
Passive port list = Te1/5/4 Te1/5/5
Port state = Port-channel L3-Ag Ag-Inuse
Protocol = -
Port security = Disabled
Fast-switchover = disabled
Load share deferral = disabled
Ports in the Port-channel:
Index Load Port EC state No of bits
------+------+------------+------------------+-----------
0 47 Te1/5/4 On 4
1 B8 Te1/5/5 On 4
（参照資料）
https://www.cisco.com/c/ja_jp/support/docs/lan-switching/etherchannel/116385-technote-etherchannel-00.html
