catalyst4500-X(VSS構成)で再起動後以下のログを出力し、EtherChannelがsuspendedになりました。何かBug等の原因があるのでしょうか?
設定も以下に記載します。
①出力ログ
%EC-5-CANNOT_BUNDLE2: Te1/1/1 is not compatible with Po1 and will be suspended (vlan translation of Te1/1/1 is different from Po1)
②設定(te1/1/1と2/1/1をグループ1でチャネル設定)
interface Port-channel1
switchport
switchport trunk allowed vlan 308,336,1420,1626,1627
switchport mode trunk
switchport vlan mapping 336 308
switchport vlan mapping 1420 1420
switchport vlan mapping 1627 1626
end
interface TenGigabitEthernet1/1/1
switchport trunk allowed vlan 308,336,1420,1626,1627
switchport mode trunk
switchport vlan mapping 336 308
switchport vlan mapping 1420 1420
switchport vlan mapping 1627 1626
logging event link-status
channel-group 1 mode on
service-policy output voice_up
interface TenGigabitEthernet2/1/1
switchport trunk allowed vlan 308,336,1420,1626,1627
switchport mode trunk
switchport vlan mapping 336 308
switchport vlan mapping 1420 1420
switchport vlan mapping 1627 1626
logging event link-status
channel-group 1 mode on
service-policy output voice_up
end