cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
930
Views
0
Helpful
1
Replies

CDR: wrong origcause_value and destcause_value filed for busy calls?

Hi,

I faced an issue trying to report call statistics for busy calls. I noticed that (both on UCM 10.5 and 11.0) incoming calls to a busy DN are reported inthe CDR with following cause values:

  • origCause_value=17
  • destCause_value =0

that is swapped respect to the expected values for busy calls: basing on the CDR admin document, origCause_value should be 0 and destCause_value should be 17.

This occurs both for internal calls (ip phone to ip phone) and external calls (coming from a VG or SIP Trunk).

Any idea?

1 REPLY 1
dstaudt
Cisco Employee

Sounds like this could be a bug...have you observed that the values are 'correct' in previous UCM versions?

I would suggest opening a DevNet developer support ticket, so the engineers can get some logs from you and potentially open a defect: Cisco DevNet: Support

Content for Community-Ad

This widget could not be displayed.