07-09-2013 04:39 AM
Hello colleagues,
Could you please help me with one small question. I'm installing 10G license on ME-3600X-24FS-M. This is what I've got before installation:
Switch# sh license
...
Index 3 Feature: 10GEUpgrade
Period left: 8 weeks 4 days
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Switch#
After the license was installed:
Switch#sh license
....
Index 3 Feature: 10GEUpgrade
Period left: Life time
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
Switch#
My question is - why license state is Not in Use. There is no sfp+ installed in the switch. Could this be the reason?
Kind regards,
Oleg Krasnov
07-11-2013 09:03 PM
Hi Oleg,
you would need to change the SDM template for this... (sdm prefer 4 or 3 )...by default the I/O mode is 1 and thus, you will be seeing the 10GEupgrade feature as "Not in Use".
refer link for detailed explanation:
Also, refer to below link for details on license types on ME3600X:
http://www.cisco.com/en/US/prod/collateral/switches/ps6568/ps10956/data_sheet_c78-601946.html
you can check your devices current I/O mode by giving "show sdm prefer" cmd.
hope this answers ur query.
07-15-2013 04:29 AM
Hi Suma,
Thanks for your help!
Changing of SDM template covers ME 3600-24CX configuration and this configuration is not valid for ME 3600-24FS-M, that I use.
There is no such options in ME-3600-24FS-M:
Switch#sh sdm prefer ?
current show current template configuration
default show default template configuration
ip show ip template configuration
Switch#
BR,
Oleg
01-28-2014 08:32 AM
The problem is this:
The output is quite misleading on the 3600’s .
It’s says evaluation and not in use.
Index: 2 Feature: 10GEUpgrade Version: 1.0
License Type: Evaluation
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
Store Index: 1
Store Name: Built-In License Storage
Plug in a 10Gig interface:
Index 3 Feature: 10GEUpgrade
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
06-30-2014 12:21 AM
hi!
i have same a problem. but if use I/O Mode 2 or Mode 3 i cant enable mpls functions on tengig ports. can you tell me, what i need to do for usage 4 tengig ports and usage in this port mpls functions
07-11-2018 01:03 AM
Plugging in the SFP module will trigger the license and you will be able to use it afterwards.
08-20-2020 12:23 AM
Hi Oleg ,
Could you please help me to upgraded/install the switch license for 10GE.
I am facing issue with Switch "ME-3600X-24TS-M" as 10GE license has expired.
Switch#show license
Index 3 Feature: 10GEUpgrade
Period left: 0 minute 0 second
Period Used: 8 weeks 4 days
License Type: Evaluation
License State: Active, Not in Use, EULA accepted
License Count: Non-Counted
License Priority: Low
Regards,
Lovely.
08-20-2020 12:36 AM - edited 08-20-2020 12:36 AM
Most likely you need to buy a new 10G licence and activate it on the switch.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: