I'm in the process of building a Metro Access spec using the ASR-920-12CZ-A
The licensing provides for 12 GE and 4 10GE ports
We want to use a mix of Copper and Fiber for the 1GE ports
On the 12CZ-A there are also 8 ports copper, fixed, it seems
Can anyone offer clarification if the 8 fixed ports are usable with or without the license?
Also can anyone help with the question of whether 1 GE SFP's can be used on the 12 1GE ports ? - The Data sheet just appears to omit refernce top this and the x8 fixed copper ports, which clashes with the comparision matrix which does reference these ports.
This implies it has both, unless I'm missing something :
The first 6 1Gports (4sfp and 2 combo) are the only ones available without the license. Interesting thing is you can use 2x 10G ports in 1G mode without the license, just plug in 1G SFP, never tried it but read that these are dual rate ports.
XR-vm - CLI's
look for any process crash, review time stamp[if it is too old, then no immediate action needed]
verify if standby state is Ready and NSR-Ready
show proc cpu | exclude " 0%"
It's been a long standing ask for XR to support conditional route advertisements in BGP.
The expected option of using the
option in RPL currently can only be used at the default-inf...
On IOS-XR, Quality of Service has an extension to WRED (Weighted Random Early Detection) called Explicit Congestion Notification (ECN). ECN will mark packets instead of dropping them when the average queue length exceeds a specific threshold value. When c...
Technical Guide to Pre-Defined NAT.
In traditional NAT, due to the government regulations logging the CGN translations is mandatory and this is a huge cost incurrence. In Pre-defined NAT, the translations are known upfront, hence there is no nee...