configuration card type 0 4controller e1 0/4/16framing crc4cem- group 0 unframingline code hdb3After this configuration controller still downE1 interface is upWhat will be the issue, anyone suggest ?
Hello
I have server-mapping in network segment routing in operator
i want tp know if server-mapping need a License to install or not ?
I wait a reply from expert segment routing cisco
Thanks in advance
we have an asr1006 connected with a lacp (mode active) with its 2 tengiga ports on a virtual port-channel between asr9922Cisco IOS XE Software, Version 16.09.04The asr have started randomly throwing out these errors:Aug 27 06:34:12: TenGigabitEtherne...
Dear Cisco Community,
One of our customer has the following business need:Currently, the customer has one border router with three ISPs. As usual, each ISP delivers only one public IP address to that router. However, there is an emerging need to have...
Morning All,New to the forum and had a question regarding adding a module to a 903. Module is a A900-IMA2ZBeen looking around and saw that you can replace a card without powering it down, but can you add a new card to the system without powering it d...
Hi,
I am new to VPLS. I am trying to test VPLS in the lab initially. My set up is extremely basic at present.
CE1 (3560CG-8) ---- PE1 (3850-12XS-S)----PE2 (3850-12XS-S)----CE2 (3560CG-8)
I have followed the instructions on the following Cisco c...
Hi guys,My customer's device has pushes many alarms as below:RP/0/RP0/CPU0:BNH8001PRT02#show logging | include checksumWed Jul 5 09:54:40.548 HanoiLC/0/7/CPU0:Jul 4 13:32:23.050 : obflmgr[73]: %OS-OBFLMGR-3-CHECKSUM_FAIL : checksum for voltage hi...
Hi guys,My customer's device has pushed many alarms as below:RP/0/RP0/CPU0:Jun 22 06:16:26.532 +07: logger[66718]: %OS-SYSLOG-4-LOG_WARNING : PAM: Unable to copy data to peer RP (IP: 172.0.31.1): RP/0/RP0/CPU0:Jun 22 06:46:50.033 +07: logger[68367]:...
Hi Team,
I have noticed a weird behaviour on my ASR920 routers trying to configure VPLS
l2 vfi TWC manual vpn id x bridge-domain x
!
interface GigabitEthernet0/0/10 description Test no ip address negotiation auto no keepalive service instance x ...
Dears,I have Cisco ISR 1161 with Cisco IOS XE Software, Version 17.06.05 and we have problem on Cellular interface 0/2/0 that goes down/down all the time. I need help please !Here is the running-config as an attachmentThank you !
Hello,I am studying for Cisco SP VPN certification and am a bit confused while going through the Ethernet OAM and CFM topics.CFM topic refers to the following terms without giving any explanation on what they are:- Relay function side- Wire sideI eve...
Hello!I have bought a few Cisco C9500 (C9500-24Y4C) that I want to be used as leafs in a VXLAN EVPN setup (Multi vendor, different spines) I'm trying to get the local VLANs in the C9500 to get encapsulated and sent across the tunnels to the nve peers...
Hello
i have 901-903-ME 3800 and i want enable these two commands : xml agent tty netconf agent tty
but i can't
how i can enable the two commands in ASR 900 :
xml agent tty
netconf agent tty
i try to put but i can't
ASR901-KHETMINE(config...
