Cisco 3750 MQC Based QoS issue

[ravisambaji]

Hi Friends,

Iam trying to configure MQC based qos on my Cisco 3750 switch. The switch accepts all commands, however when i apply the service policy to the interface it doesn't have any effect. I don't see any matching packets with show policy-map commands, however all my traffic passes through. My ACL was permit any any.

Can any one help me with working MQC based qos configuration example for Cisco 3750 switch.

Regards

Ravi

[Ruchir Jain]

Hi Ravi,

Could you please paste your config. Also, can you tell me what are you trying to achieve with QOS. 3750 is a hardware switched platform so QOS config is different on this platform. Could also tell me the exact device and IOS version you are using. I could help you with your QOS config then.

Cheers,

Ruchir