08-13-2018 04:02 AM
Hello community.
I need help with Cisco ASR-920-12SZ-IM. From the first start, the STAT weapon is red.
Is it normal?
Is there a hardware failure?
Solved! Go to Solution.
09-10-2018 02:25 AM
Hi asiergd.
Thank you for your help. It's an interesting track. I finally found a solution.
It was necessary:
1- Switch off all unconecected ports (shutdown).
2- And also plug in the two power supply.
And that's it, the problem is solved.
09-10-2018 12:28 AM
Hi D DIAKHATE,
check this link:
Review Table 3, PWR and STAT LED Indicators, for example:
If PWR LED is Green and STAT LED is Red, then a major or critical alarm (high temperature reported for any sensor) or multiple fan failure.
Regards
09-10-2018 02:25 AM
Hi asiergd.
Thank you for your help. It's an interesting track. I finally found a solution.
It was necessary:
1- Switch off all unconecected ports (shutdown).
2- And also plug in the two power supply.
And that's it, the problem is solved.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: