Cisco Catalyst 9300 Stack Configuration

[gqadirmirza]

Hi All

We have purchased the Cisco catalyst 9300 switches and replacing them with HP5500. The switches will be used as Core in the network. I haven't worked on these switches before and looking some help in stack configuration.

Please share the stack configuration for these switches. Any example configuration will be really helpful. Also please let me know what other consideration do i need during the migration. 

Thank you

[mvsheik123]

Hi,

Check the below link. Gives you some direction on Stack config on 9300.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-6/configuration_guide/b_166_stck_mgr_ha_9300_cg/b_166_stck_mgr_ha_9300_cg_chapter_00.pdf

hth

MS

[ceracaza08 · Accepted solution]

The procedures/steps should be similar to other platforms like 3750.