We have 7 new metro Ethernet circuits from our service provider to remote locations with qinq trunks. All of these connections are point to point connections terminating at central site using a 7 different s-vlans on a single ENNI port.
We need the ability to have a number of c-vlans accessible from all of the 7 remote locations via these connections. We are struggling to find a Cisco device and a configuration to allow for this to happen. It seems like any Cisco gear supporting MEF 26 ENNI standard is crazy expensive. Do any lower end Cisco device support something like this? I had hoped a ME3400 would do the job but it looks like I need to shell out some serious cash for an asr?
Some of you may have watched the session at Cisco’s first all-digital Cisco Live and I hope you found it helpful. This is the first in a series of companion blogs that will later cover in more detail the topics discussed in the session today. ...
CCO documentation lists out the ability to do a password recovery for eXR with a ZTP/PXE boot.
One can also perform the operation manually, like a "turboboot" for classic XR in this facinity.
this procedure will wipe out the complete system and install a...
Below is a link to a video showing how to analyze traceroute output in L3VPN and look up CEF forwarding and MPLS/TE/SR/SR-TE forwarding for labels through a domain. Some basic examples of traffic engineering are used but the concepts lend the...
This document summarises various health checks that can be done on a Cisco VIM pod.
Cloud sanity checks the health status of network, storage and various openstack infrastructure components like mariadb, rabbitmq etc....
The following pre-requisites are necessary for the migration from RSP440 to RSP880-LT to be successful.
Make sure that you have console access to the router.
Verify that the system is running a minimum o...