cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2338
Views
0
Helpful
1
Replies

EVC Configuration Comparison 7600 vs ASR9k

judebryant
Level 1
Level 1

Just curious to know if anyone has migrated from the 7600 metro series routers to ASR9ks.

specifically, how to translate the following from 7600 to ASR


ingress/egress traffic tagged with vlan200((7600/lo01.1.1.1/int gig3/0/0)(trunk port te1/0/0))<=mpls=>((trunk port te1/0/0)(7600/lo02.2.2.2/int gig3/0/0))ingress egress traffic tagged with vlan200


7600 router with lo0 of 1.1.1.1
using ldp

interface gig3/0/0
  service instance 200 ethernet
  encapsulation dot1q 200
  xconnect 2.2.2.2 999 encapsulation mpls

7600 router with lo0 of 2.2.2.2
using ldp

interface gig3/0/0
  service instance 200 ethernet
  encapsulation dot1q 200
  xconnect 1.1.1.1 999 encapsulation mpls

whats the equivalent on ASR9k?

static or dynamic point to point cross-connects?

?????
l2vpn
xconnect group vlan200_traffic

interface gig0/0/0/3.200 l2transport
encapsulation dot1q 200
neighbor 2.2.2.2 pw-id 999

or

l2vpn
xconnect group vlan200_traffic
p2p vlan200
interface gig0/0/0/3.200
neighbor 2.2.2.2 pw-id 200

not really sure

Regards
Jude

1 Reply 1

judebryant
Level 1
Level 1

        Answered   

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: