cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2443
Views
0
Helpful
2
Replies

IOS-XR config to implement LDP tunneling over RSVP-TE core

katetranva
Level 1
Level 1

Hello,

I am looking for IOS-XR configuration to tunnel LDP over RSVP-TE core. Do you have a link or pointer on how to do this?  

Someone in this forum posted how to do it for IOS a while back:

 Enable LDP on the tunnel intf. On the headend, config:

int tu0

tag ip

mpls label proto ldp

Enable tailend to accept directed LDP session., On the tailend config:

mpls ldp discovery targeted-hello accept

Thank you,

Kate

2 Replies 2

prsubra2
Cisco Employee
Cisco Employee

Hi,

Did you get the solution for the above request?

Thanks,

Praveen Kumar

Bradley Gould
Level 1
Level 1

You need to enable ldp on the tunnel:

mpls ldp

  interface tunnel-te1000

mpls ldp discovery targeted-hello accept

This is correct, on the tail you need to accept targeted hello's.

Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.3.x

The key words here are "LDP Discovery for active targeted hellos".  Juniper call this LDP tunnelling.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: