Hello,
I am seeing an issue in which my SLA operation's return code is OK, but I'm unable to obtain any measurements. When issuing a 'show ip sla stat [op #] detail', I see measurements being initiated as expected, but none are completing:
hostname#sh ip sla stat 1000 det
IPSLAs Latest Operation Statistics
IPSLA operation id: 1000
Delay Statistics for Y1731 Operation 1000
Type of operation: Y1731 Delay Measurement
Latest operation start time: 18:20:36.608 EDT Thu Aug 30 2018
Latest operation return code: OK
Distribution Statistics:
Interval
Start time: 18:20:36.608 EDT Thu Aug 30 2018
Elapsed time: 23 seconds
Number of measurements initiated: 17
Number of measurements completed: 0
Flag: OK
Delay:
Number of TwoWay observations: 0
Min/Avg/Max TwoWay: 0/0/0 (microsec)
Time of occurrence TwoWay:
Min - 19:00:00.000 EST Thu Dec 31 1899
Max - 19:00:00.000 EST Thu Dec 31 1899
SLA config:
ip sla 1000
ethernet y1731 delay DMM domain test_domain vlan 100 mpid 10 cos 0 source mpid 9
history interval 5
aggregate interval 60
ip sla schedule 1000 life forever start-time now
I am able to see and ping my remote MEP, so the issue seems specific to the SLA operation. Additionally, I have a frame loss SLA operation using this MEP pair and it completes measurements as expected, along the same path.
Some additional configuration info: I have the handoff port and uplink in the same bridge domain, utilizing service instances. The MEP is configured in the 'up' direction on the handoff port. I have other SLA operations using the same config on this device and they are working fine.
Model: A901-12C-F-D
SW Version: 15.5(3)S6b
Any suggestions on troubleshooting why these measurements would not be completing? Thanks!
