Dear Readers,
Problem: I can not get the second power supply working.
Please see below point 3.) Cisco Power-Supply Quick Guide
I think i know why its not working please assit if you know why/how.
Cisco is talking about Installing the DC Power-Supply Module step 4 "16-gauge copper wire".
Our field engineer when placing the switch on site did not carry out this step.
Is it not working because step 4 was not carried out ?
---------------------------------------------------------------------------------
Type: ME-3400E-24TS-M
1.)
show inventory
NAME: "Power Supply 1", DESCR: "FRU Power Supply"
PID: ME34X-PWR-AC
2.)
show env power
POWER SUPPLY 1 is AC OK
AC Input : OK
Output : OK
Fan : OK
POWER SUPPLY 2 is NOT PRESENT - Alarm disabled
3.)
https://www.cisco.com/c/en/us/td/docs/switches/metro/me3400e/hardware/quick/guide/me3400e_pwr.html
Regards,
Agab