11-21-2013 07:55 AM
Hi
After upgrade to 15.3(3)S and on one switch with 15.3(1)S1 i got error
(config)#interface GigabitEthernet0/11
(config-if)#service-policy output qos-test
Qos: Out of tcam resources to execute command
QoS: Policy attachment failed. Configuration exceeds hardware resources
for policy qos-test
#show logging
...
Nov 21 15:47:28: %QOSMGR-3-TCAM_EXHAUSTION: Internal Error in resource
allocation
...
bg-ba-m-1#show platform tcam utilization qos
Nile Tcam Utilization per Application & Region:
ES == Entry size == Number of 80 bit TCAM words
==================================================================
App/Region Start Num Avail ES Used Range Num Used
==================================================================
QOS 36864 4096 2
nile0 13
nile1
(config-if)#service-policy output qos-test
Qos: Out of tcam resources to execute command
QoS: Policy attachment failed. Configuration exceeds hardware resources
for policy qos-test
#show logging
...
Nov 21 15:47:28: %QOSMGR-3-TCAM_EXHAUSTION: Internal Error in resource
allocation
...
#show platform tcam utilization qos
Nile Tcam Utilization per Application & Region:
ES == Entry size == Number of 80 bit TCAM words
==================================================================
App/Region Start Num Avail ES Used Range Num Used
==================================================================
QOS 36864 4096 2
nile0 13
nile1 6
Solved! Go to Solution.
12-17-2015 06:05 AM
Hi startx001 and LCC Data Networks,
This issue is related with TCAM resource exhaustion:
Issue the following command:
sh platform tcam utilization qos and see if you still have available entries to be used:
XXXXXXXXXX#sh platform tcam utilization qos
Nile Tcam Utilization per Application & Region:
ES == Entry size == Number of 80 bit TCAM words
==================================================================
App/Region Start Num Avail ES Used Range Num Used
==================================================================
QOS 36864 4096 2
nile0 1802
nile1 1376
I had to ajdust QoS profiles to free space.
Hope this help you.
02-08-2015 11:29 PM
Hi startx001, hope you will be fine.
Did you a find a solution for this issue?
I'm facing same problem
12-02-2015 01:20 AM
This issue seems to arise when matching any vlan (match vlan 1-4094) on a class-map. It does possibly sound like a bug, but I've now ameneded my class-map to match all traffic based on protocol instead - this seems like it might work OK.
Class-map match-any class1
Match protocol ip
Match protocol ipv6
Match protocol arp
Match protocol cdp
12-17-2015 06:05 AM
Hi startx001 and LCC Data Networks,
This issue is related with TCAM resource exhaustion:
Issue the following command:
sh platform tcam utilization qos and see if you still have available entries to be used:
XXXXXXXXXX#sh platform tcam utilization qos
Nile Tcam Utilization per Application & Region:
ES == Entry size == Number of 80 bit TCAM words
==================================================================
App/Region Start Num Avail ES Used Range Num Used
==================================================================
QOS 36864 4096 2
nile0 1802
nile1 1376
I had to ajdust QoS profiles to free space.
Hope this help you.
11-20-2015 05:59 AM
Also got the same issue.
11-28-2015 08:02 AM
Could you please share the below output:
- show platform tcam utilization all
- show platform tcam utilization qos
- show platform qos label structs
- show sdm prefer current
- show run
Please attach all the above outputs in a file. Also, could you please let me know how many vlans are there on the switch and if the service-policy is being applied on a trunk port.
Thanks
Vinit
11-30-2015 09:27 AM
I've now got a TAC case open, and the TAC engineer has managed to replicate the fault. I'm waiting to hear back. I've also attached the outputs here for information.
I started with a completely blank config, and applied the following to replicate the error:
class-map match-all voice
match dscp ef
class-map match-any class1
match vlan 1-4094policy-map policy1-voice
class voice
priority
police cir 4000000
conform-action transmit
exceed-action droppolicy-map policy1
class class1
shape average 40000000
service-policy policy1-voicevlan 1794
int gi0/8
switchport trunk allowed vlan 1794
switchport mode trunk
service-policy output policy1Qos: Out of tcam resources to execute command
QoS: Policy attachment failed. Configuration exceeds hardware resources for policy policy1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide