I have VPLS between 2 ASR920 routers running fine, can ping across the same Vlan from one Laptop to another.
When I turn off VPLS on the physical interface, instead bring up a GRE tunnel and configure VPLS on the GRE tunnel, I am unable to ping across the switches in the same Vlan.
1. Can ping Tunnel source to destination
2. Can ping between Tunnel IPs
3. OSPF is up between routers, advertising the Loopbacks (Via the Tunnel)
4. LDP is up between both routers
Is there something that I am missing? I am using Firmware asr920-universalk9_npe.16.07.01.SPA.bin but I have also tried asr920-universalk9_npe.16.06.02.SPA.bin and asr920-universalk9_npe.03.18.03.SP.156-2.SP3-ext.bin with same results
Am I doing something wrong? Would appreciate some help with this.
Listen: https://smarturl.it/CCRS9E19Follow us: twitter.com/ciscochampionsNetworks can be complex and often unpredictable. Traffic from over-the-top applications, automated systems, malicious attacks, or variations from simple operational errors...
Listen: https://smarturl.it/CCRS9E15 Follow us: https://twitter.com/CiscoChampion
Standing up and operating a mobile 5G network can be a challenging task, but Private 5G doesn’t need to be. Now, there is a simple solution for enterprises that...
Factory Reset - Erasing and Wiping out user data from disk memory on IOS-XR routers
Typically, user data on a router or a switch could be the router configurations [ip addresses and login credentials], process core, debug logs, show tech-support, images, ...
Listen: https://smarturl.it/CCRS9E7Follow us: twitter.com/ciscochampion
Routed optical networking, part of the Converged SDN Transport Architecture, is a new network paradigm that delivers improved operational efficiencies and simplicity. The soluti...
The IT Blog Awards, hosted by Cisco, aims to recognize all of the amazing technology content creators who contribute to our community all year long. Now it's up to you to weigh in. Be sure to vote for your favorites before Friday, February...