MPLS

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Forum Posts

Hi All,I'm looking to set up an MPLS lab using kit and was wondering if anyone had any experience using 2651XM's for this purpose?!I threw c2600-advipservicesk9-mz.123-4.T6.bin on one 2651 to check MPLS support and all the commands seem to be there.....

Hi all, Does anyone know if it is possible to apply LLQ and/or shaping on the outbound direction of an MPLS-TE tunnel?Thanks,David

I have int gig 4/47 running mpls and have assigned ip address to it.I am interested in finding out what is the local label assigned to this ip prefix on this router.I understand that router generate local labels to all the routes in the FIB and thus ...

Resolved! VRF import-map

Hello!I have configured VRF with the same RD and RT across the few Catalyst6500 and try to use import-map for modifing imported routes (set metric) but it doesn't work.Config of VRF:vrf definition VRF  rd 1:1  route-target import 1:1  route-target ex...

Hi there,I'm having some dificulties make the multicast working inside a multi AS inter-AS VPN setup.The setup is like this, based on Option C.PE(AS1)--RR(AS1)--ASBR1(AS1)-ASBR1(AS2)--RR(AS2)--ASBR2(AS2)---ASBR1(AS3)--PE(AS3)All is fine between each ...

Hi,i am setting up FRoMPLS connection using a pair of 7200VXR with IOS 12.2(33)SRE5. I need to copy the TOS values from the tunneled IP header into the EXP bits of the MPLS label(or even better, set the EXP bits using the DSCP values of the IP header...

Hi,After upgrade from 10 Mbps to 20 Mbps BGP down,if we remove the  services policy immediately BGP came up.!class-map match-any COS3match ip dscp cs1class-map match-any COS2match ip dscp cs4match ip dscp af21match access-group name COS2_LISTclass-ma...

Hello, 1)I have a question regarding Cisco 7600/6500 ( sup720 exactely) in MPLS.I've read in documentation and also in some forum posts that "show mpls cef" is not MPLS aware command and should be used only for IP traffic. But still in some Cisco doc...

I have few doubts about Multicast RP address We have MPLS ISP backbone network, here two P routers are configured as RP address(IN GLOBAL) and MSDP is running between them.Now, my doubts are All the Multicast customer we are giving is under MVPN onl...

Hello Iam a bit curious on how to best solve a little problem i seem to have. How do i terminate a multipoint L2 transport from a ME 3600XInitial idea was with VFI on all 3 devices but ME3600X dosent seem to support it. With the use of a VFI i would ...

Top Solution Authors