While labbing EVPN-VPWS on CSR1000v and XR9000v, I've found an interoperability issue. I can successfully create an EVPN-VPWS between two CSR1000vs or two XR9000vs, but not between a CSR1000v and XR9000v.The problem is that XR9000v does not use the c...
Forum Posts
Hi, My first post here, so forgive me if i missed already existent answer, but i think i did my best and did not find it Case is rather simple. We're configuring MPLS VPWS ending in pseudowire interface in our core network, where ASR9K would be our h...
Hello everyone,does anyone have experience with this kind of convertors ? We have 2 E1 lines and want to migrate them trough Ethernet / MPLS network. We think to use convertor like this one:https://www.ad-net.com.tw/product/2-x-e1-over-ip-tdm-over-ip...
Hi Team, ASR9k is connected to a Nokia router. IGP neighborship is Up, ldp is up. Regular ping also works but Mpls ping doesn't work. RP/0/RP1/CPU0:KV-ASR9912-AGG2#ping 10.100.235.67 so lo0 Mon Apr 27 13:54:49.735 UTCType escape sequence to abort.S...
Resolved! BGP UPDATE and ROUTE REFRESH packets
Hello,I'm trying to understand how often BGP UPDATE messages get exchanged between neighbors, I understand that when a BGP neighborship is first established, UPDATE messages get exchanged between neighbors, but let's say I've applied a routing-policy...
Resolved! BGP Update Messages
Can a bgp UPDATE message carry more than a single prefix ? I have read a lot of text about this ( Halabi, Doyle, RFC 1771 ) but I think the wording that this literature is never clear to me about what they are exactly saying.below is a quote from RFC...
Hi All, Can we configure Multicast VPLS at ASR 9901 with LDP signaling and any documentation about it ? At documentation, I only found how to configure Multicast VPLS with BGP Signaling (BGP Auto Discovery), but not with LDP Signaling. Thanks Re...
Resolved! disable smart license on C9606R
Hello Folks,My Router CPU is getting to 99%.MY LDP destroyed many times because of that as i searched through community they suggested to factory reset smart license then reload the router.my question here is this:Does factory resetting smart licens...
Hi everyone! We are facing a log on the device recently and the service on vlan stop responding. Do ypu have an idea how to fix this? Could you explain what Remote peer withdrew label last error means?
Hi I am hoping to confirm if Nexus 9300 (N9K-C93240YC-FX2) supports MVPN (multicast VPN). I checked Cisco feature navigator but Nexus doesn't seem to be available. Thanks Alex
HI,PE7#sh ip cef vrf cust1 22.22.22.2222.0.0.0/8, version 16, epoch 0, cached adjacency 40.40.40.10 packets, 0 bytes tag information set local tag: VPN-route-head fast tag rewrite with Fa0/0.40, 40.40.40.1, tags imposed: {17 28} via 4.4.4.4, ...
We have this log on Nexus 5672UP %VPC-2-PEER_KEEP_ALIVE_RECV_FAIL: In domain 100, VPC peer keep-alive receive has failed Appreciate your comments.
Resolved! L3 Switch not routing traffic
Hello, I set up this topology in Packet Tracer and it worked just fine. Any help would be greatly appreciated, ThanksThis is an internal network only.I set up 1 C3560-CX switch in L3 mode and 4 C3560-CX switch in L2.I can ping and connect to each swi...
Hello, I am very new to SR world. we are implementing SR with OSPF as IGP. can somebody tell me how to find SR label by using various show commands? any link or any one can share show commands in brief that will be great help me to start checking lab...
Hi guys, I'm trying my first VPLS static config between two AS920 and I cannot find a way to define under pseudowire config, a neighbor which is only reached in a VRF not in the Global Routing Table. Something like "neighbor vrf <vrf_name> <ip> <vc>"...
