MPLS

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Forum Posts

I have an interesting problem in which enabling EIGRP on the PE for connecting to the CE router, causes OSPF in the MPLS routers to drop their neighbour and establish the session again. I have attached a diagram showing the MPLS environment with the ...

Can anyone advise if there is support for interVRF multicasting over MPLS VPN network?We have successfully configured mVPN within a VRF. But cannot seem to get it work across different VRFs - multicast server in red VRF and receivers in green VRF.Ple...

pppyyyppp by Level 1
  • 1901 Views
  • 5 replies
  • 0 Helpful votes

Hi,I was reading IOS 12.2SR documentation for ISIS protocol and I came across ISIS Fast Flooding LSP configuration! It is bit dark for me to understand so any one has any idea about it? how does it works and how can i have an advantage to use it for ...

Hi,I need to decide upon a device which is MPLS L3 VPN capable & We can terminate L2TP, IPSEC tunnels , & SSL VPNs too in large numbers.. How is ASR 1000 in this respect?thx,GP

Hi,I have a Cisco gear cloud. The cisco one uses SSM for mVPN for both default and data MDT. Now I have to intergrate mVPN into a cloud which has Juniper gear, dont know much about Juniper cloud MVPN details, but I have heard that there are interope...

I have a question regarding the Down Bit. All the documentation I see concentrates on the redistribution of the MP-BGP into OSPF but I want to know more about the OSPF redistribution into MP-BGP. I think the rule is different for Type3 and Type5 LSAs...

walter1972 by Level 1
  • 1898 Views
  • 13 replies
  • 0 Helpful votes

We have a pesudowire connectivity and it is is experiencing packet drops. This connectivity we are using for internet.When pinging to our gateway router from router server no drops but pinging to interface that is connected to remote PE via pesudowir...

Top Solution Authors