Hello,In the cco i dis not find any explication for the following message: MPLS: Et0/1: recvd: CoS=0, TTL=255, Label(s)=18/212d05h: tagsw_replace_header: Pkt drop -- EoS conflict, incg label 18 hwinput Et0/1Thus any one has some clue.thanks
Hello...Please Help,I have a Single Area OPSF network running across 4 main routers via GigEth Ckts. The OSPF Network is working correctly. I recently implemented MPLS TE creating two Tunnels - One Explicit Path and One Dynamic Path. Two of the Route...
Hi:Based on paper titled "L3 MPLS VPN Enterprise Consumer Guide" page 16 (http://www.cisco.com/en/US/partner/netsol/ns465/networking_solutions_white_papers_list.html). My SP has only 3 CoS for its VPN service. I have classified up to 10 different cla...
Folks, Is there any enhanced command on a cisco router that would let a system administrator telnet to devices in different VRFs within the provider network (no restrictions from the CE side).Thanks
Hi:Based on paper titled "L3 MPLS VPN Enterprise Consumer Guide" page 16 (http://www.cisco.com/en/US/partner/netsol/ns465/networking_solutions_white_papers_list.html). My SP has only 3 CoS for its VPN service. I have classified up to 10 different cla...
Hi,I am setting up EoMPLS (AToM) in my lab. Topology is simple, just have 2 Cat6509 (with native IOS) connect back-to-back. These 2 Catalyst act as PE. On each catalyst, there is one catalyst acting as host (CE). I am configuring 'mpls l2transport' u...
If I wanted to simply build LSPs (assume no TE nor any plans for TE in the future), which signalling protocol would be the best to use (assume vendor neutral)? Would appreciate a rational as to why you would chose one over the other.
my company supplies metro-ethernt over MPLS.i am tring to implement layer vpn for a customer using ospf on the CE router area 1 traffic will go via my MPLS network and out to another CE router in area 0. I am unable to ping vrf network across PE rout...
hy guys,i know that here maybe it's not the ideal place to post this question, but on the cisco forum a don't find a better place :).so :we want to implement some bgp communities in our mpls backbone to help ebgp customers and to have in final a very...
Hi all, it is just my curiousity that ended up with a small discussion like this. Here's about it...My company has a main client which have tonnes of remote sites connecting to both their HQ and Disaster Recovery Centre. Some of the remote sites stil...
Hi,Can't find the LNS config directives those will lead to get complete(!) vpdn profile from radius.The configuration is:LAC-LNS/PE-LNS/CELNS/PE - provider edge lns that we want to configure using radius profile for vrf-aware multihop vpdn so that in...
Hi,A customer has about 40 sites in MPLS VPN. All sites are stub and have point-to-point connections to Service provider PE's. Few of these sites have dual point-to-point links to PE's. The customer wants to use OSPF as CE-PE routing protocol. Can so...
