cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
448
Views
0
Helpful
1
Replies

bgp allowas-in

sachin30720041
Beginner
Beginner

Hello,

I have following setup. CE3 and CE4 are running bgp as a PC-CE protocol. CE3 and CE4 are configured in AS 34. routes are not exchanged between CE3 and CE4. Although I have configured 'allowas-in' on both CE3 and CE4.  VPNV4 routes are exchanged between PE1 and PE2.

CE3-------PE1----PE2----CE4

Configuration:-

ios3
-------------------
int gi0/0
ip address 100.10.30.3 255.255.255.0
no sh

int lo0
ip address 3.3.3.3 255.255.255.255

router bgp 34
bgp router-id 3.3.3.3
template peer-session session12
remote-as 12
exit
neighbor 100.10.30.1 inherit peer-session session12
address-family ipv4 unicast
network 3.3.3.3 mask 255.255.255.255
neighbor 100.10.30.1 activate
neighbor 100.10.30.1 allowas-in
exit


XRV1
-------------------
vrf vrf1
address-family ipv4 unicast
export route-target 1:1
import route-target 2:2
exit

int gi0/0/0/0
vrf vrf1
ip address 100.10.30.1 255.255.255.0
no sh

int gi0/0/0/1
ip address 100.10.20.1 255.255.255.0
no sh


int lo0
ipv4 address 1.1.1.1 255.255.255.255

router isis 1
net 49.0001.1111.1111.1111.00
is-type level-2
address-family ipv4 unicast
metric-style wide
mpls ldp auto-config
exit
int gi0/0/0/1
address-family ipv4 unicast
exit
int lo0
address-family ipv4 unicast
exit
exit

route-policy pass
pass
exit

mpls ldp
exit

router bgp 12
address-family ipv4 unicast
exit
address-family vpnv4 unicast
exit
neighbor-group group12
remote-as 12
update-source lo0
address-family vpnv4 unicast
exit
neighbor-group group34
remote-as 34
address-family ipv4 unicast
route-policy pass in
route-policy pass out
exit
neighbor 2.2.2.2
use neighbor-group group12
vrf vrf1
rd 1:1
address-family ipv4 unicast
exit
neighbor 100.10.30.3
use neighbor-group group34

XRV2
-------------------
vrf vrf1
address-family ipv4 unicast
export route-target 2:2
import route-target 1:1
exit

int gi0/0/0/0
vrf vrf1
ip address 100.20.40.2 255.255.255.0
no sh

int gi0/0/0/1
ip address 100.10.20.2 255.255.255.0
no sh


int lo0
ipv4 address 2.2.2.2 255.255.255.255

mpls ldp
exit

router isis 1
net 49.0002.2222.2222.2222.00
is-type level-2
address-family ipv4 unicast
metric-style wide
mpls ldp auto-config
exit
int gi0/0/0/1
address-family ipv4 unicast
exit
int lo0
address-family ipv4 unicast
exit
exit

route-policy pass
pass
exit

router bgp 12
bgp router-id 2.2.2.2
address-family ipv4 unicast
exit
address-family vpnv4 unicast
exit
neighbor-group group12
remote-as 12
update-source lo0
address-family vpnv4 unicast
exit
neighbor-group group34
remote-as 34
address-family ipv4 unicast
route-policy pass in
route-policy pass out
exit
neighbor 1.1.1.1
use neighbor-group group12
vrf vrf1
rd 1:1
address-family ipv4 unicast
exit
neighbor 100.20.40.4
use neighbor-group group34

ios4
-----------------
int gi0/0
ip address 100.20.40.4 255.255.255.0
no sh

int lo0
ip address 4.4.4.4 255.255.255.255

router bgp 34
template peer-session session12
remote-as 12
exit
neighbor 100.20.40.2 inherit peer-session session12
address-family ipv4 unicast
network 4.4.4.4 mask 255.255.255.255
neighbor 100.20.40.2 activate
neighbor 100.20.40.2 allowas-in
exit

 

1 Accepted Solution

Accepted Solutions

Harold Ritter
Cisco Employee
Cisco Employee

Hi @sachin30720041 ,

IOS-XR does the outbound AS path loop check by default. You can configure the following command to disable it.

router bgp 12

 vrf vrf1

  address-family ipv4 unicast

   as-path-loopcheck out disable

Regards,

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

View solution in original post

1 Reply 1

Harold Ritter
Cisco Employee
Cisco Employee

Hi @sachin30720041 ,

IOS-XR does the outbound AS path loop check by default. You can configure the following command to disable it.

router bgp 12

 vrf vrf1

  address-family ipv4 unicast

   as-path-loopcheck out disable

Regards,

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers