Hi,
After exaust search on the internet about how to change the Remote hostname feature on the Path Trace Buffer (J1), I didnt find the solutions. The Concern is that my customer want to See on their side with do show controller the Remote Hostname as other End Hostname, and not the PE locally connected to him.
Can anybody please help me to figure out this in order to hide the MPLS PE structure and let the CE's see each other Remote Hostname and other Remote features to be the order remote CE, instead of local PE? Eventually this is to emulate pure SDH over MPLS.
Please help.
PE-1#show controllers pos1/0
POS1/0
SECTION
LOF = 0 LOS = 0 BIP(B1) = 0
LINE
AIS = 0 RDI = 0 FEBE = 0 BIP(B2) = 0
PATH
AIS = 0 RDI = 0 FEBE = 0 BIP(B3) = 0
PLM = 0 UNEQ = 0
LOP = 0 NEWPTR = 6625 PSE = 9517 NSE = 0
Active Defects: None
Active Alarms: None
Alarm reporting enabled for: SF SLOS SLOF B1-TCA LAIS LRDI B2-TCA PAIS PLOP PRDI B3-TCA
Path triggers active (no delay)
Framing: SDH
APS
COAPS = 0 PSBF = 0
State: PSBF_state = False
Rx(K1/K2): 00/00 Tx(K1/K2): 00/00
S1S0 = 02, C2 = 16
CLOCK RECOVERY
RDOOL = 0
State: RDOOL_state = False
PATH TRACE BUFFER: STABLE
Remote hostname : blad810
Remote interface: POS7/1/0
Remote IP addr : 57.35.27.113
Remote Rx(K1/K2): 00/00 Tx(K1/K2): 00/00
BER thresholds: SF = 10e-3 SD = 10e-6
TCA thresholds: B1 = 10e-6 B2 = 10e-6 B3 = 10e-6
Clock source: line
Cheers.
