Configuring end-to-end SLA (Availability, Jitter, PL, OWD) per QoS Class over L2VPN or EoMPLS

[itsnavee4]

I have configured EoMPLS to provide L2VPN solution to a customer. I need to monitor CE to CE SLA for Jitter, Packet Loss, Availability, RTD and OWD.

Can someone help me figure it out.

I am using SAA router in my PoP to get IP SLA values for all L3VPN customers which is working fine with me.

But i need to figure out the SLA monitoring over layer 2 connectivity. There is a management IP on CE over layer3 in a separate vlan, but i can not use this IP and use IP SLA because these values will be IP based which is not what i want.

I need pure layer 2 SLA values to plot the graphs.

Anyone has any idea to sort it out?

[Laurent Aubert · Accepted solution]

HI,

Let me know if this is what you are looking for:

http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/sr_meth.html

Thanks,

Laurent.

[itsnavee4]

sorry for late reply ... the document was helpfull ... thanks for your help and support ...