cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
configure & troubleshoot anyconnect
161
Views
0
Helpful
1
Replies
Highlighted
Beginner

How to config QoS police on NCS 5501

Hi

 Please suggest about configuration L2VPN QoS to me.I have migration plan C7600 to NCS5500 and I try to convert configuration policy-map police from IOS to IOS-XR.But my configuration failed below.

 

IOS-Configration

policy-map 2.5G
class class-default
police cir 2500000000 bc 1300000
conform-action transmit
exceed-action drop
----

IOS-XR Configration [Failed]
policy-map 2.5G
class class-default
police rate 2500000000 bps burst 1300000 bytes
conform-action transmit
exceed-action drop

 

Qos verification failed for policy-map.: Policy-map 2.5G class class-default failed: Number of actions for 'police conform' exceeds limit 0

 

Thanks. [Sorry my English skill is poor.]

 

1 REPLY 1
Hall of Fame Expert

Re: How to config QoS police on NCS 5501

Hello Anycast,

try without using the conform-action and exceed-action option

 

see the following example from QoS config guide IOS XR 6.6.6 for NCS

 

https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/qos/66x/b-qos-cg-ncs5500-66x/b-qos-cg-ncs5500-66x_chapter_0100.html#concept_8C09549AC9D44D70BF203A72EE92418D

 

if you look at the example it does not use the conform and exceed options in the configuration.

 

To be noted: per documentation the NCS supports policing only inbound and not oubound an interface.

This is the most important limitation to take care of.

 

Hope to help

Giuseppe

 

CreatePlease to create content