03-15-2005 07:22 AM
Hi engineers
Is it possible to redistribute routes from a vrf instance into the global routing table?
I need this scenario for a migration from a normal Layer 3 core to MPLS. My intention would be to redistribute the vrf routes into global routing table and send a default route into vrf routing table.
The addresses from global routing table and vrf do not overlap
Can somebody help me?
cheers
patrick
03-15-2005 08:38 AM
This document was posted this week in response to the same question.
http://www.cisco.com/en/US/tech/tk436/tk832/technologies_configuration_example09186a0080231a3e.shtml
Hope this helps,
04-13-2005 08:12 PM
Unfortunately, this document details simple static routes.
Is there a way for VRF BGP learned routes (ipv4 family) to be leaked into a GRT routing table?
Sort of like a target-import/export to/from GRT?
Vice-versa?
I have a GRT and a VRF running iBGP to local neighbors. I wish to leak dynamic routes to one another.
Unfortunately, I cannot use 2 VRFs.
Any help much appreciated!
Nick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide