We have a client connected through VSAT. I am at Service Provider place and client is connected through VSAT link in MPLS cloud. I am facing intermittent ping drop in the tunnel interface terminated at other end. Pl help how do i check the trouble shoot the problem.
actually you have configured ip mtu thats why you were not able to see on interface. If you change then mtu with only mtu command then it will be changed.
only MTU is realted to harware
ip mtu "IP MTU is used to determine whether a non-labeled IP packet forwarded through an interface has to be fragmented (the IP MTU has no impact on labeled IP packets). It has to be lower or equal to hardware MTU (and this limitation is enforced).
loadbalancing is one of the more complex items in hardware forwarding. of course we have talked about it many years on cisco live (id 2904) with ever incrementing more detail. and there is the support forum article on loadbalancing.
IntroductionArchitecture Building BlocksIOS-XR RoutersConfigurationPerformance VerificationOptimizationStrict timerSome more verificationThe CollectorInfluxDBDatabase statistics and HealthClosing comments
This document was written in collaboration with:
IOS-XR MPLS TE Auto Tunnel Backup Bandwidth Protection Current Implementation of MPLS TE Auto Tunnel BackupPotential issue with current implementation of MPLS TE auto tunnel backupEnhancement to MPLS TE auto backup in IOS XR 7.5.1Supported HardwareConfig ...
we are trying to monitor the Cisco 9148s SFP status, and have get the Sensor's dBm value from the CISCO-ENTITY-SENSOR-MIB table, meanwile , it has an Index value like "30000xxxx",such as "30001773", entsensorValueTable but we can't sure how to l...
Check out our latest release on Cisco Routed Optical Networking solution. Listen: https://smarturl.it/CCRS8E24Follow us: https://twitter.com/ciscochampion Disruptive network transformation may only happen once a decade. First movers c...