We are in the process of building traffic matrix in our network to analyze and use for our forecasting the network growth.
I am planning to make use of LDP traffic statistics counters to determine traffic flow between PE routers i.e. per LSP. Only LDP is used for LSP formation not RSVP-TE. I am making use of the CLI "show mpls forwarding-table <prefix>" which lists the "Bytes tag switched" but the counters are not increasing.
C7206-NPE-G2#sh mpls for a.b.c.d
Local Outgoing Prefix Bytes tag Outgoing Next Hop
tag tag or VC or Tunnel Id switched interface
719 16697 a.b.c.d/32 0 Gi0/2 x.x.x.x
I tried by doing a ping from the local router to the destination and traffic is flowing through the LSP. Even tried pining a L3 MPLS VPN customer connected between source and destination routers, but still the counters are not increasing.
Platform and IOS version in use are: 7206 NPE-G2 and c7200p-spservicesk9-mz.124-15.T12.bin.
I would like to know
1. whether use of "LDP traffic statistics" work for my requirement.
2. any known issues in IOS with the above command i.e. could this be related to software defect
IOS upgrade on asr9xx mandates rommon upgrades sometimes while they can be optional at other times. You may land up in unwanted situation if proper procedure is not followed during upgrades.
This article will include complete details about rommon ...
In some situation NCS560 RP become unresponsive after reload or powercycle.
In many deployments NCS560 far edge, deployment is large and human intervention should be kept at minimum
Engineering team have been working on a strategy to have functi...
In simple terms, 'Route Churn' is defined as the 'rate of change of prefixes'. Different XR versions across 4.x to 7.x have differing behavior & support for the BGP churn handling and some enhancements made from 6.5.3 onwards (listed in appendix) mak...
Prior to Cisco IOS XR Software Release 7.1.2, XR dual RP devices did not support file mirroring from active RP to standby RP. Administrators had to manually perform the task or use EEM scripts to sync files across active RP and stand...
Hi Everyone, Would like to extend my thanks in advance for anyone offering assistance. As the subject hints, anyone here know of a way to convert IOS configs to XR config? I seen and heard about SOX tool but i am unable to find it. I also tried ...