cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1601
Views
5
Helpful
2
Replies
Highlighted

MPLS / RSVP-TE in Nokia (Alcatel-Lucent) SR OS and Cisco IOS XR Interface tunnel-te not up

Topology:
Nokia - ASR900 - ASR9k

Spoiler
ASR9k#sho mpl traffic-eng tunnels 12092
Fri Sep 22 11:40:09.400 BKK

Name: tunnel-te12092  Destination: 10.x.40.92  Ifhandle:0x8000860
  Signalled-Name: P1_t12092
  Status:
    Admin:    up Oper: down   Path: not valid   Signalling: Down

    path option 10,  type explicit NO_BE1_2
    Last PCALC Error: Thu Sep 21 17:04:36 2017
      Info: Can't find destination 0000.0000.0000.00
    path option 50,  type dynamic
    Last PCALC Error: Thu Sep 21 17:04:36 2017
      Info: Destination IP address, 10.x.40.92, not found in topology
    G-PID: 0x0800 (derived from egress interface properties)
    Bandwidth Requested: 0 kbps  CT0
    Creation Time: Thu Sep 21 11:46:20 2017 (23:53:49 ago)
  Config Parameters:
    Bandwidth:        0 kbps (CT0) Priority:  4  4 Affinity: 0x0/0xffff
    Metric Type: TE (default)
    Path Selection:
      Tiebreaker: Min-fill (default)
    Hop-limit: disabled
    Cost-limit: disabled
    Path-invalidation timeout: 45000 msec (default), Action: Tear (default)
    AutoRoute: disabled  LockDown: disabled   Policy class: not set
    Forward class: 0 (default)
    Forwarding-Adjacency: disabled
    Loadshare:          0 equal loadshares
    Auto-bw: disabled
    Fast Reroute: Enabled, Protection Desired: Node
    Path Protection: Not Enabled
    BFD Fast Detection: Disabled
    Reoptimization after affinity failure: Enabled
    Soft Preemption: Disabled
Displayed 1 (of 1) heads, 0 (of 0) midpoints, 0 (of 1) tails
Displayed 0 up, 1 down, 0 recovering, 0 recovered heads

How should I do?

 

Thank you very much.

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: MPLS / RSVP-TE in Nokia (Alcatel-Lucent) SR OS and Cisco IOS XR Interface tunnel-te not up

I found it. Before I posted here, I changed the system IP of Nokia. However, when I show mpls traffic-eng topology, ASR9k still saw the old address. I tried to reload Nokia box, it's solved, the tunnel came up.

 

Thank you very much.

2 REPLIES 2
Enthusiast

Re: MPLS / RSVP-TE in Nokia (Alcatel-Lucent) SR OS and Cisco IOS XR Interface tunnel-te not up

Hi,

 

the PCALC error is telling you the reason why the Tunnel is not up.

 

Check with "show mpls traffic-eng topology 10.x.40.92". 

Most reasonable cause of this failure is that you do not have mpls end-to-end enabled (MPLS TE, RSVP etc).

Just check your configuration.

Re: MPLS / RSVP-TE in Nokia (Alcatel-Lucent) SR OS and Cisco IOS XR Interface tunnel-te not up

I found it. Before I posted here, I changed the system IP of Nokia. However, when I show mpls traffic-eng topology, ASR9k still saw the old address. I tried to reload Nokia box, it's solved, the tunnel came up.

 

Thank you very much.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards