09-21-2017 09:42 PM - edited 03-01-2019 03:14 PM
Topology:
Nokia - ASR900 - ASR9k
How should I do?
Thank you very much.
Solved! Go to Solution.
09-24-2017 08:02 PM
I found it. Before I posted here, I changed the system IP of Nokia. However, when I show mpls traffic-eng topology, ASR9k still saw the old address. I tried to reload Nokia box, it's solved, the tunnel came up.
Thank you very much.
09-22-2017 12:18 AM
Hi,
the PCALC error is telling you the reason why the Tunnel is not up.
Check with "show mpls traffic-eng topology 10.x.40.92".
Most reasonable cause of this failure is that you do not have mpls end-to-end enabled (MPLS TE, RSVP etc).
Just check your configuration.
09-24-2017 08:02 PM
I found it. Before I posted here, I changed the system IP of Nokia. However, when I show mpls traffic-eng topology, ASR9k still saw the old address. I tried to reload Nokia box, it's solved, the tunnel came up.
Thank you very much.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide