Dear all,
Does everyone has an idea on how to activate "per-packet load sharing" on a 7606S with RSP720-3CXL engine and 7600-ES+20G3CXL module.
The IOS version is : 7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRD4, RELEASE SOFTWARE (fc2)
I tried the two (2) following commands but they are not supported :
- hw-module slot1 ip load-sharing per-packet
- ip load-sharing per-packet (on interface)
Any help is welcome.
Thanks in advance.
