I am trying to establish qinq over atom between 2 ASR-1001x running mpls in between. Everything comes up after configuration but I am not able to ping each other. At the same time layer2 mpls- atom with single vlan is working fine.
Instead of testing with host , we are using switches with Vlan interfaces for ping test. Swicthes are connected with trunk to routers
Please find the below configuration
Router A
interface GigabitEthernet0/0/3.740
description test
encapsulation dot1Q 740 second-dot1q 741
!
interface pseudowire740
encapsulation mpls
neighbor 172.21.159.1 740
l2vpn xconnect context QIIND
member pseudowire740
member GigabitEthernet0/0/3.740
SWITCH A
interface Vlan741
ip address 10.1.1.2 255.255.255.0
ROUTER B
interface GigabitEthernet0/0/3.740
description test
encapsulation dot1Q 740 second-dot1q 741
!
interface pseudowire740
encapsulation mpls
neighbor 172.21.143.254 740
!
l2vpn xconnect context QIIND
member pseudowire740
member GigabitEthernet0/0/3.740
Switch-B
interface Vlan741
ip address 10.1.1.1 255.255.255.0
Please fins the below show commands
ROUTER A
SH MPLs L2transport Vc
Local intf Local circuit Dest address VC ID Status
Gi0/0/3.740 Eth VLAN 740/741 172.21.159.1 740 UP
Router B
SH MPLs L2transport Vc
Gi0/0/3.740 Eth VLAN 740/741 172.21.143.254 740 UP
