Using "route-target import" only connected routes?
When using the route-target import, the only routes imported are ones directly connected on one of the other PE routers. How does one get the advertised routes and the connected routes imported?
PE1 -- PE2
Customer's remote site attaches to PE1 which peers to PE2. PE2 connects to Customer HQ.
Another VRF (100:110) provides a centralized service that will be used by several different customers. Some of the subnets for this shared service are directly connected to PE2 while other subnets are directly connected to PE3.
Since PE1 and PE2 were already peered, I thought all that was needed was an import statement to get the routes from the shared service vrf into the customer's vrf.
ip vrf customer1
route-target export 100:105
route-target import 100:105
route-target import 100:110
When I do a 'show ip route vrf Customer1' the only routes that appear are the ones directly connected to PE2. I then peered PE1 to PE3, creating a full mesh but no other routes appeared in the routing table.
PE1 -- PE2
I plan to use an export map and import map to filter the networks to the desired ones, but in this example, should not all routes be seen from the shared services VRF (100:110)?
Listen: https://smarturl.it/CCRS8E39 Follow us: twitter.com/CiscoChampion5G and Wi-Fi 6, the next generation of mobile wireless technologies are here! But what does that mean? Where and how is 5G being deployed? What is Wi-Fi 6? Who’s on first? ...
loadbalancing is one of the more complex items in hardware forwarding. of course we have talked about it many years on cisco live (id 2904) with ever incrementing more detail. and there is the support forum article on loadbalancing.
IntroductionArchitecture Building BlocksIOS-XR RoutersConfigurationPerformance VerificationOptimizationStrict timerSome more verificationThe CollectorInfluxDBDatabase statistics and HealthClosing comments
This document was written in collaboration with:
IOS-XR MPLS TE Auto Tunnel Backup Bandwidth Protection Current Implementation of MPLS TE Auto Tunnel BackupPotential issue with current implementation of MPLS TE auto tunnel backupEnhancement to MPLS TE auto backup in IOS XR 7.5.1Supported HardwareConfig ...
we are trying to monitor the Cisco 9148s SFP status, and have get the Sensor's dBm value from the CISCO-ENTITY-SENSOR-MIB table, meanwile , it has an Index value like "30000xxxx",such as "30001773", entsensorValueTable but we can't sure how to l...