%PM-4-ERR_DISABLE_VP: elmi evc down error detected on Fa0/24, vlan 101. Putting in err-disable state.
Thank you very much.
upe11#sho ethern cfm dom
Domain Name: provider_domain Level: 4 Total Services: 2 Services: Type Id Dir CC CC-int Static-rmep Crosscheck MaxMEP MA-Name Vlan 101 Up Y 1s Disabled Disabled 100 customer_101_provider Vlan 110 Up Y 1s Disabled Disabled 100 customer_110_provider
ce11#sho int f0/1
FastEthernet0/1 is up, line protocol is up (connected)
ce21#sho int f0/1
FastEthernet0/1 is up, line protocol is up (connected) (vlan-err-dis)
When I run the command 'sh controllers fabric fia q-depth location 0/0/CPU0' or any 0/X/CPU0 and see the following, what exactly does it mean? RP/0/RSP0/CPU0:Router#sh controllers fabric fia q-depth location 0/0/CPU0********** FIA-0 **********Categor...
Symptoms: the root password can't log in by GUI Solution:1) login CLI as admin2) write command "ncs webroot enable" without qutations3) we can check the status by "ncs webroot status" hope this will help someonethanks
ISO images are as close as we can get to the old school classic IOS images from back in they day.
Doing upgrades by putting a new image on the flash, changing the boot pointer and reload was and is still the walhalla of Cisco based devices.
Is this LTE card tied to specific provider such as Verizon or ATT. If I buy one of these for Verizon carrier, and later decide to move to ATT. Can I replace the software image to support ATT vendor? or will have to buy a new LTE card specific f...