08-08-2021 11:32 PM
Hi friends ,
L2vpn
bridge group test
bridge-domain test
mtu 9202
neighbor 1.1.1.1 pw-id 5292 ---->Doubt
!
vfi test
neighbor 2.2.2.2 pw-id 5292 ---->Doubt
pw-class for_test
!
pw-class for_test
encapsulation mpls
control-word
load-balancing
flow-label both
What is the difference between neighbor 1.1.1.1 which is configured under bridge-domain & neighbor 2.2.2.2 which is configured under vfi test.
show l2vpn bridge-domain bd-name test shows 1.1.1.1 under List of access PWs and 2.2.2.2 under List of VFIs.
Could anyone explain the difference
Thanks in advance.
Solved! Go to Solution.
08-09-2021 02:00 AM
Since we do not know the toplogy to explore more.
as of the information of the post
Establishes a Layer 2 VPN (L2VPN) virtual forwarding interface (VFI) between two or more separate networks and enters VFI configuration mode.
5292 - pseudowire-id (this will be unique based on the end customer or circuit)
Like to understand mode, there is deep session Cisco Live - BRKSPG-2202
08-09-2021 02:00 AM
Since we do not know the toplogy to explore more.
as of the information of the post
Establishes a Layer 2 VPN (L2VPN) virtual forwarding interface (VFI) between two or more separate networks and enters VFI configuration mode.
5292 - pseudowire-id (this will be unique based on the end customer or circuit)
Like to understand mode, there is deep session Cisco Live - BRKSPG-2202
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide