01-19-2017 04:49 PM - edited 03-11-2019 12:22 AM
I have a 3550 running the latest IOS, cat3k_caa-universalk9. I am having an issue getting aaa authentication working. Below is a copy of my config.
Solved! Go to Solution.
01-19-2017 07:54 PM
What is the issue you are seeing? Is the TACACS packet not reaching the server? Try setting it up using the "aaa group server tacacs+ [Group_Name]" instead of tacacs-server. You should be able to specify the vrf for the aaa servers using the "ip vrf forwarding command". Use the following doc as reference:
http://www.cisco.com/c/en/us/support/docs/security-vpn/terminal-access-controller-access-control-system-tacacs-/113667-ios-vrf-tshoot.html
01-19-2017 07:54 PM
What is the issue you are seeing? Is the TACACS packet not reaching the server? Try setting it up using the "aaa group server tacacs+ [Group_Name]" instead of tacacs-server. You should be able to specify the vrf for the aaa servers using the "ip vrf forwarding command". Use the following doc as reference:
http://www.cisco.com/c/en/us/support/docs/security-vpn/terminal-access-controller-access-control-system-tacacs-/113667-ios-vrf-tshoot.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide