cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1448
Views
0
Helpful
1
Replies

AAA Session Time Out

adeelasher
Level 1
Level 1

Dear All

I have two CISCO AS 5300 the problem i am facing is that user is not disconnected when session time out is over.I can see in RADIUS log that RADIUS is assigning session time out. I have two other NAS (MAX600 & MAX TNT). They both work fine with same RADIUS.

I have group Async and a virtual template. Already checked by removing group-async and virtual-template.

the problem remains there.

1 Reply 1

zaslam
Level 1
Level 1

Your per-user timer values will be coming down during network authorization, so you must have the aaa authorization network command configured to whatever method you are using, which is RADIUS or TACACS+. Also note that per-user timers will always override any global values that are preconfigured on the NAS.

so you have to enter this command

aaa authorization network default group radius

along with other aaa commands