Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
1924
Views
0
Helpful
4
Replies

ACS 2.6 / user d exactly after 10 minutes why ? analog or ISDN same result

p.emery
Beginner
Beginner

‎06-06-2002 10:55 AM - edited ‎02-21-2020 10:00 AM

hi

i have a cisco Router 3640 with modem and it is a NAS and every user is autorise from Cisco Secure 2.6 and unfortunatly every 10 minutes exactly ...it didn't depends from ISDN or analogique and i have tried to foud in cisco secure or inside the route which parameters could sbe bad but i cand find which disturb my user

could you help me ?

here is the router config :

version 12.1

no service single-slot-reload-enable

service timestamps debug uptime

service timestamps log uptime

service password-encryption

!

hostname NAS_3640_1

!

logging buffered 4096 debugging

logging rate-limit console 10 except errors

aaa new-model

aaa authentication login default group radius

aaa authentication login no_radius local

aaa authentication ppp dial_in group radius

aaa authorization network default group radius

aaa authorization network dial_in group radius

enable secret 5 <removed>

!

username test1 password 7 <removed>

username admin password 7 <removed>

modem country mica XXXX

ip subnet-zero

!

!

no ip finger

!

virtual-profile virtual-template 1

virtual-profile aaa

isdn switch-type basic-net3

!

!

!

interface Loopback0

description for PPP Users

ip address 172.16.248.1 255.255.255.0

!

interface FastEthernet0/0

ip address 192.168.254.3 255.255.255.0

duplex auto

speed auto

!

interface BRI1/0

no ip address

encapsulation ppp

dialer rotary-group 1

isdn switch-type basic-net3

isdn incoming-voice modem

no cdp enable

ppp authorization dial_in

!

interface BRI1/1

no ip address

encapsulation ppp

dialer rotary-group 1

isdn switch-type basic-net3

isdn incoming-voice modem

no cdp enable

ppp authorization dial_in

!

interface BRI1/2

no ip address

encapsulation ppp

dialer rotary-group 1

isdn switch-type basic-net3

isdn incoming-voice modem

no cdp enable

ppp authorization dial_in

!

interface BRI1/3

no ip address

encapsulation ppp

dialer rotary-group 1

isdn switch-type basic-net3

isdn incoming-voice modem

no cdp enable

!

interface FastEthernet3/0

ip address 192.168.240.1 255.255.255.252

duplex auto

speed auto

!

interface Virtual-Template1

ip unnumbered Loopback0

ppp authentication chap dial_in

ppp authorization dial_in

!

interface Group-Async1

ip unnumbered FastEthernet0/0

encapsulation ppp

dialer in-band

dialer idle-timeout 7200

async default routing

async dynamic address

async mode dedicated

no peer default ip address

ppp authentication chap dial_in

ppp authorization dial_in

group-range 65 76

!

interface Dialer1

ip unnumbered Loopback0

encapsulation ppp

dialer in-band

dialer idle-timeout 7200

dialer-group 1

no peer default ip address

no cdp enable

ppp authentication chap dial_in

ppp authorization dial_in

!

ip classless

ip route 0.0.0.0 0.0.0.0 192.168.254.1

no ip http server

!

radius-server host 192.168.240.2 auth-port 1645 acct-port 1646

radius-server retransmit 3

radius-server key 7 <removed>

!

line con 0

password 7 <removed>

login authentication no_radius

transport input none

line 65 76

autoselect during-login

autoselect ppp

login authentication dialin

modem InOut

modem autoconfigure discovery

transport input all

stopbits 1

flowcontrol hardware

line aux 0

line vty 0 4

exec-timeout 0 0

password 7 <removed>

login authentication no_radius

many thanks for your helps

philippe

Labels:
0 Helpful
4 Replies 4

p.emery
Beginner
Beginner

‎06-06-2002 10:59 AM

here i have the log from an ISDN connection :

1d02h: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to up

1d02h: BR1/0:1 AAA/AUTHOR/FSM: (0): LCP succeeds trivially

1d02h: AAA: parse name=BRI1/0:1 idb type=14 tty=-1

1d02h: AAA: name=BRI1/0:1 flags=0x55 type=2 shelf=0 slot=1 adapter=0 port=0 chan

nel=1

1d02h: AAA: parse name= idb type=-1 tty=-1

1d02h: AAA/MEMORY: create_user (0x6156048C) user='coucou' ruser='' port='BRI1/0:

1' rem_addr='0329533045/9533005' authen_type=CHAP service=PPP priv=1

1d02h: AAA/AUTHEN/START (3354427015): port='BRI1/0:1' list='dial_in' action=LOGI

N service=PPP

1d02h: AAA/AUTHEN/START (3354427015): found list dial_in

1d02h: AAA/AUTHEN/START (3354427015): Method=radius (radius)

1d02h: RADIUS: ustruct sharecount=1

1d02h: RADIUS: Initial Transmit BRI1/0:1 id 30 192.168.240.2:1645, Access-Reques

t, len 98

1d02h: Attribute 4 6 C0A8F001

1d02h: Attribute 5 6 00007531

1d02h: Attribute 61 6 00000000

1d02h: Attribute 1 8 636F7563

1d02h: Attribute 30 9 39353333

1d02h: Attribute 31 12 30333239

1d02h: Attribute 3 19 1B0AA1D5

1d02h: Attribute 6 6 00000002

1d02h: Attribute 7 6 00000001

1d02h: RADIUS: Received from id 30 192.168.240.2:1645, Access-Accept, len 186

1d02h: Attribute 6 6 00000002

1d02h: Attribute 7 6 00000001

1d02h: Attribute 10 6 00000000

1d02h: Attribute 11 8 3130312E

1d02h: Attribute 22 29 3137322E

1d02h: Attribute 26 49 00000009012B6970

1d02h: Attribute 26 50 00000009012C6970

1d02h: Attribute 8 6 AC10F8FE

1d02h: Attribute 9 6 FFFFF800

1d02h: AAA/AUTHEN (3354427015): status = PASS

1d02h: BR1/0:1 AAA/AUTHOR/LCP: Authorize LCP

1d02h: BR1/0:1 AAA/AUTHOR/LCP (1395507533): Port='BRI1/0:1' list='dial_in' servi

ce=NET

1d02h: AAA/AUTHOR/LCP: BR1/0:1 (1395507533) user='coucou'

1d02h: BR1/0:1 AAA/AUTHOR/LCP (1395507533): send AV service=ppp

1d02h: BR1/0:1 AAA/AUTHOR/LCP (1395507533): send AV protocol=lcp

1d02h: BR1/0:1 AAA/AUTHOR/LCP (1395507533): found list "dial_in"

1d02h: BR1/0:1 AAA/AUTHOR/LCP (1395507533): Method=radius (radius)

1d02h: RADIUS: cisco AVPair "ip:dns-servers=172.16.69.17 172.16.121.17" not appl

ied for lcp

1d02h: RADIUS: cisco AVPair "ip:wins-servers=172.16.69.20 172.16.121.21" not app

lied for lcp

1d02h: BR1/0:1 AAA/AUTHOR (1395507533): Post authorization status = PASS_REPL

1d02h: BR1/0:1 AAA/AUTHOR/LCP: Processing AV service=ppp

1d02h: BR1/0:1 AAA/AUTHOR/LCP: Processing AV routing*false

1d02h: BR1/0:1 VP: Create and clone from virtual-template 1

1d02h: Vt1 VTEMPLATE: (Pre)cloning vaccess from recycle queue

1d02h: Vi1 VTEMPLATE: Has a new cloneblk vtemplate, now it has vtemplate

1d02h: Vi1 VTEMPLATE: ************* CLONE VACCESS1 *****************

1d02h: Vi1 VTEMPLATE: Clone from Virtual-Template1

interface Virtual-Access1

default ip address

no ip address

encap ppp

ip unnumbered loopback 0

enc ppp

ip unnumbered loopback 0

encapsulation ppp

end

1d02h: Vi1 VP: Create Virtual Profile for BR1/0:1

1d02h: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up

1d02h: Vi1 VP: Bind to BR1/0:1

1d02h: Vi1 VP: Bind fastswitching vectors

1d02h: Vi1 VP: Copied LCP state from BR1/0:1

1d02h: Vi1 AAA/AUTHOR/FSM: (0): Can we start IPCP?

1d02h: Vi1 AAA/AUTHOR/FSM (2212599508): Port='BRI1/0:1' list='dial_in' service=N

ET

1d02h: AAA/AUTHOR/FSM: Vi1 (2212599508) user='coucou'

1d02h: Vi1 AAA/AUTHOR/FSM (2212599508): send AV service=ppp

1d02h: Vi1 AAA/AUTHOR/FSM (2212599508): send AV protocol=ip

1d02h: Vi1 AAA/AUTHOR/FSM (2212599508): found list "dial_in"

1d02h: Vi1 AAA/AUTHOR/FSM (2212599508): Method=radius (radius)

1d02h: RADIUS: framed-route 172.16.0.0 255.255.0.0 192.168.254.1

1d02h: RADIUS: cisco AVPair "ip:dns-servers=172.16.69.17 172.16.121.17"

1d02h: RADIUS: cisco AVPair "ip:wins-servers=172.16.69.20 172.16.121.21"

1d02h: RADIUS: Authorize IP address 172.16.248.254

1d02h: RADIUS: Framed-IP-Netmask 255.255.248.0

1d02h: RADIUS: framed-route 172.16.248.0 255.255.248.0

1d02h: Vi1 AAA/AUTHOR (2212599508): Post authorization status = PASS_REPL

1d02h: Vi1 AAA/AUTHOR/FSM: We can start IPCP

1d02h: Vi1 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 0.0.0.0

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV service=ppp

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV routing*false

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV inacl=101

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV route=172.16.0.0 255.255.0.0 192.168.2

54.1

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV dns-servers=172.16.69.17 172.16.121.17

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV wins-servers=172.16.69.20 172.16.121.2

1

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV addr=172.16.248.254

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV netmask*255.255.248.0

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV route=172.16.248.0 255.255.248.0

1d02h: Vi1 AAA/AUTHOR/IPCP: Authorization succeeded

1d02h: Vi1 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 172.16.248.254

1d02h: Vi1 AAA/AUTHOR/IPCP: primary dns server 172.16.69.17

1d02h: Vi1 AAA/AUTHOR/IPCP: primary wins server 172.16.69.20

1d02h: Vi1 AAA/AUTHOR/IPCP: seconday dns server 172.16.121.17

1d02h: Vi1 AAA/AUTHOR/IPCP: seconday wins server 172.16.121.21

1d02h: Vi1 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 172.16.248.254

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV service=ppp

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV routing*false

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV inacl=101

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV route=172.16.0.0 255.255.0.0 192.168.2

54.1

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV dns-servers=172.16.69.17 172.16.121.17

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV wins-servers=172.16.69.20 172.16.121.2

1

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV addr=172.16.248.254

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV netmask*255.255.248.0

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV route=172.16.248.0 255.255.248.0

1d02h: Vi1 AAA/AUTHOR/IPCP: Authorization succeeded

1d02h: Vi1 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 172.16.248.254

1d02h: Vi1 AAA/AUTHOR/IPCP: primary dns server 172.16.69.17

1d02h: Vi1 AAA/AUTHOR/IPCP: primary wins server 172.16.69.20

1d02h: Vi1 AAA/AUTHOR/IPCP: seconday dns server 172.16.121.17

1d02h: Vi1 AAA/AUTHOR/IPCP: seconday wins server 172.16.121.21

1d02h: Vi1 AAA/AUTHOR/IPCP: Start. Her address 172.16.248.254, we want 172.16.2

48.254

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV service=ppp

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV routing*false

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV inacl=101

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV route=172.16.0.0 255.255.0.0 192.168.2

54.1

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV dns-servers=172.16.69.17 172.16.121.17

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV wins-servers=172.16.69.20 172.16.121.2

1

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV addr=172.16.248.254

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV netmask*255.255.248.0

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV route=172.16.248.0 255.255.248.0

1d02h: Vi1 AAA/AUTHOR/IPCP: Authorization succeeded

1d02h: Vi1 AAA/AUTHOR/IPCP: Done. Her address 172.16.248.254, we want 172.16.24

8.254

1d02h: Vi1 AAA/AUTHOR/IPCP: primary dns server 172.16.69.17

1d02h: Vi1 AAA/AUTHOR/IPCP: primary wins server 172.16.69.20

1d02h: Vi1 AAA/AUTHOR/IPCP: seconday dns server 172.16.121.17

1d02h: Vi1 AAA/AUTHOR/IPCP: seconday wins server 172.16.121.21

1d02h: Vi1 AAA/AUTHOR/PER-USER: Event IP_UP

1d02h: Vi1 AAA/AUTHOR: IP_UP

1d02h: Vi1 AAA/PER-USER: processing author params.

1d02h: Vi1 VTEMPLATE: Has a new cloneblk AAA, now it has vtemplate/AAA

1d02h: Vi1 VTEMPLATE: ************* CLONE VACCESS1 *****************

1d02h: Vi1 VTEMPLATE: Clone from AAA

interface Virtual-Access1

IP access-group 101 in

end

1d02h: Vi1 AAA/AUTHOR: Vaccess parse 'interface Virtual-Access1

IP access-group 101 in

' ok (0)

1d02h: Vi1 AAA/AUTHOR: Parse 'IP route 172.16.0.0 255.255.0.0 192.168.254.1'

1d02h: Vi1 AAA/AUTHOR: Parse returned ok (0)

1d02h: Vi1 AAA/AUTHOR: enqueue peruser IP txt=no IP route 172.16.0.0 255.255.0.0

192.168.254.1

1d02h: Vi1 AAA/AUTHOR: Parse 'ip route 172.16.248.0 255.255.248.0 172.16.248.254

'

1d02h: Vi1 AAA/AUTHOR: Parse returned ok (0)

1d02h: Vi1 AAA/AUTHOR: enqueue peruser IP txt=no ip route 172.16.248.0 255.255.2

48.0 172.16.248.254

1d02h: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/0:1, changed state t

o up

1d02h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed

state to up

1d02h: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 0329533045 coucou

NAS_3640_1#

and here an analogue one :

1d02h: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 0329576000

NAS_3640_1#

1d02h: As75 AAA/AUTHOR/FSM: (0): LCP succeeds trivially

1d02h: %LINK-3-UPDOWN: Interface Async75, changed state to up

1d02h: AAA: parse name=Async75 idb type=10 tty=75

1d02h: AAA: name=Async75 flags=0x11 type=4 shelf=0 slot=0 adapter=0 port=75 chan

nel=0

1d02h: AAA: parse name=BRI1/0:1 idb type=14 tty=-1

1d02h: AAA: name=BRI1/0:1 flags=0x55 type=2 shelf=0 slot=1 adapter=0 port=0 chan

nel=1

1d02h: AAA/MEMORY: create_user (0x6156048C) user='coucou' ruser='' port='Async75

' rem_addr='0329576000/9533008' authen_type=CHAP service=PPP priv=1

1d02h: AAA/AUTHEN/START (1518246456): port='Async75' list='dial_in' action=LOGIN

service=PPP

1d02h: AAA/AUTHEN/START (1518246456): found list dial_in

1d02h: AAA/AUTHEN/START (1518246456): Method=radius (radius)

1d02h: RADIUS: ustruct sharecount=1

1d02h: RADIUS: Initial Transmit Async75 id 29 192.168.240.2:1645, Access-Request

, len 98

1d02h: Attribute 4 6 C0A8F001

1d02h: Attribute 5 6 0000004B

1d02h: Attribute 61 6 00000000

1d02h: Attribute 1 8 636F7563

1d02h: Attribute 30 9 39353333

1d02h: Attribute 31 12 30333239

1d02h: Attribute 3 19 01652D42

1d02h: Attribute 6 6 00000002

1d02h: Attribute 7 6 00000001

1d02h: RADIUS: Received from id 29 192.168.240.2:1645, Access-Accept, len 186

1d02h: Attribute 6 6 00000002

1d02h: Attribute 7 6 00000001

1d02h: Attribute 10 6 00000000

1d02h: Attribute 11 8 3130312E

1d02h: Attribute 22 29 3137322E

1d02h: Attribute 26 49 00000009012B6970

1d02h: Attribute 26 50 00000009012C6970

1d02h: Attribute 8 6 AC10F8FD

1d02h: Attribute 9 6 FFFFF800

1d02h: AAA/AUTHEN (1518246456): status = PASS

1d02h: As75 AAA/AUTHOR/LCP: Authorize LCP

1d02h: As75 AAA/AUTHOR/LCP (1184823696): Port='Async75' list='dial_in' service=N

ET

1d02h: AAA/AUTHOR/LCP: As75 (1184823696) user='coucou'

1d02h: As75 AAA/AUTHOR/LCP (1184823696): send AV service=ppp

1d02h: As75 AAA/AUTHOR/LCP (1184823696): send AV protocol=lcp

1d02h: As75 AAA/AUTHOR/LCP (1184823696): found list "dial_in"

1d02h: As75 AAA/AUTHOR/LCP (1184823696): Method=radius (radius)

1d02h: RADIUS: cisco AVPair "ip:dns-servers=172.16.69.17 172.16.121.17" not appl

ied for lcp

1d02h: RADIUS: cisco AVPair "ip:wins-servers=172.16.69.20 172.16.121.21" not app

lied for lcp

1d02h: As75 AAA/AUTHOR (1184823696): Post authorization status = PASS_REPL

1d02h: As75 AAA/AUTHOR/LCP: Processing AV service=ppp

1d02h: As75 AAA/AUTHOR/LCP: Processing AV routing*false

1d02h: As75 VP: Create and clone from virtual-template 1

1d02h: VTEMPLATE: No unused vaccess, create new vaccess

1d02h: Vi1 VTEMPLATE: Set default settings with no ip address, encap ppp

1d02h: Vi1 VTEMPLATE: Hardware address 0006.d775.d8c1

1d02h: Vi1 VTEMPLATE: Has a new cloneblk vtemplate, now it has vtemplate

1d02h: Vi1 VTEMPLATE: ************* CLONE VACCESS1 *****************

1d02h: Vi1 VTEMPLATE: Clone from Virtual-Template1

interface Virtual-Access1

default ip address

no ip address

encap ppp

ip unnumbered loopback 0

enc ppp

ip unnumbered loopback 0

encapsulation ppp

end

1d02h: Vi1 VP: Create Virtual Profile for As75

1d02h: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up

1d02h: Vi1 VP: Bind to As75

1d02h: Vi1 VP: Bind fastswitching vectors

1d02h: Vi1 VP: Copied LCP state from As75

1d02h: Vi1 AAA/AUTHOR/FSM: (0): Can we start IPCP?

1d02h: Vi1 AAA/AUTHOR/FSM (2439018656): Port='Async75' list='dial_in' service=NE

T

1d02h: AAA/AUTHOR/FSM: Vi1 (2439018656) user='coucou'

1d02h: Vi1 AAA/AUTHOR/FSM (2439018656): send AV service=ppp

1d02h: Vi1 AAA/AUTHOR/FSM (2439018656): send AV protocol=ip

1d02h: Vi1 AAA/AUTHOR/FSM (2439018656): found list "dial_in"

1d02h: Vi1 AAA/AUTHOR/FSM (2439018656): Method=radius (radius)

1d02h: RADIUS: framed-route 172.16.0.0 255.255.0.0 192.168.254.1

1d02h: RADIUS: cisco AVPair "ip:dns-servers=172.16.69.17 172.16.121.17"

1d02h: RADIUS: cisco AVPair "ip:wins-servers=172.16.69.20 172.16.121.21"

1d02h: RADIUS: Authorize IP address 172.16.248.253

1d02h: RADIUS: Framed-IP-Netmask 255.255.248.0

1d02h: RADIUS: framed-route 172.16.248.0 255.255.248.0

1d02h: Vi1 AAA/AUTHOR (2439018656): Post authorization status = PASS_REPL

1d02h: Vi1 AAA/AUTHOR/FSM: We can start IPCP

1d02h: Vi1 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 0.0.0.0

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV service=ppp

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV routing*false

1d02h: Vi1 AAA/AUTHOR/IPCP: Set routing to FALSE

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV inacl=101

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV route=172.16.0.0 255.255.0.0 192.168.2

54.1

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV dns-servers=172.16.69.17 172.16.121.17

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV wins-servers=172.16.69.20 172.16.121.2

1

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV addr=172.16.248.253

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV netmask*255.255.248.0

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV route=172.16.248.0 255.255.248.0

1d02h: Vi1 AAA/AUTHOR/IPCP: Authorization succeeded

1d02h: Vi1 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 172.16.248.253

1d02h: Vi1 AAA/AUTHOR/IPCP: primary dns server 172.16.69.17

1d02h: Vi1 AAA/AUTHOR/IPCP: primary wins server 172.16.69.20

1d02h: Vi1 AAA/AUTHOR/IPCP: seconday dns server 172.16.121.17

1d02h: Vi1 AAA/AUTHOR/IPCP: seconday wins server 172.16.121.21

1d02h: Vi1 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 172.16.248.253

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV service=ppp

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV routing*false

1d02h: Vi1 AAA/AUTHOR/IPCP: Set routing to FALSE

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV inacl=101

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV route=172.16.0.0 255.255.0.0 192.168.2

54.1

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV dns-servers=172.16.69.17 172.16.121.17

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV wins-servers=172.16.69.20 172.16.121.2

1

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV addr=172.16.248.253

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV netmask*255.255.248.0

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV route=172.16.248.0 255.255.248.0

1d02h: Vi1 AAA/AUTHOR/IPCP: Authorization succeeded

1d02h: Vi1 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 172.16.248.253

1d02h: Vi1 AAA/AUTHOR/IPCP: primary dns server 172.16.69.17

1d02h: Vi1 AAA/AUTHOR/IPCP: primary wins server 172.16.69.20

1d02h: Vi1 AAA/AUTHOR/IPCP: seconday dns server 172.16.121.17

1d02h: Vi1 AAA/AUTHOR/IPCP: seconday wins server 172.16.121.21

1d02h: Vi1 AAA/AUTHOR/IPCP: Start. Her address 172.16.248.253, we want 172.16.2

48.253

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV service=ppp

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV routing*false

1d02h: Vi1 AAA/AUTHOR/IPCP: Set routing to FALSE

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV inacl=101

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV route=172.16.0.0 255.255.0.0 192.168.2

54.1

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV dns-servers=172.16.69.17 172.16.121.17

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV wins-servers=172.16.69.20 172.16.121.2

1

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV addr=172.16.248.253

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV netmask*255.255.248.0

1d02h: Vi1 AAA/AUTHOR/IPCP: Processing AV route=172.16.248.0 255.255.248.0

1d02h: Vi1 AAA/AUTHOR/IPCP: Authorization succeeded

1d02h: Vi1 AAA/AUTHOR/IPCP: Done. Her address 172.16.248.253, we want 172.16.24

8.253

1d02h: Vi1 AAA/AUTHOR/IPCP: primary dns server 172.16.69.17

1d02h: Vi1 AAA/AUTHOR/IPCP: primary wins server 172.16.69.20

1d02h: Vi1 AAA/AUTHOR/IPCP: seconday dns server 172.16.121.17

1d02h: Vi1 AAA/AUTHOR/IPCP: seconday wins server 172.16.121.21

1d02h: Vi1 AAA/AUTHOR/PER-USER: Event IP_UP

1d02h: Vi1 AAA/AUTHOR: IP_UP

1d02h: Vi1 AAA/PER-USER: processing author params.

1d02h: Vi1 VTEMPLATE: Has a new cloneblk AAA, now it has vtemplate/AAA

1d02h: Vi1 VTEMPLATE: ************* CLONE VACCESS1 *****************

1d02h: Vi1 VTEMPLATE: Clone from AAA

interface Virtual-Access1

IP access-group 101 in

end

1d02h: Vi1 AAA/AUTHOR: Vaccess parse 'interface Virtual-Access1

IP access-group 101 in

' ok (0)

1d02h: Vi1 AAA/AUTHOR: Parse 'IP route 172.16.0.0 255.255.0.0 192.168.254.1'

1d02h: Vi1 AAA/AUTHOR: Parse returned ok (0)

1d02h: Vi1 AAA/AUTHOR: enqueue peruser IP txt=no IP route 172.16.0.0 255.255.0.0

192.168.254.1

1d02h: Vi1 AAA/AUTHOR: Parse 'ip route 172.16.248.0 255.255.248.0 172.16.248.253

'

1d02h: Vi1 AAA/AUTHOR: Parse returned ok (0)

1d02h: Vi1 AAA/AUTHOR: enqueue peruser IP txt=no ip route 172.16.248.0 255.255.248.0 172.16.248.253

1d02h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed

state to up

thanks everybody for your helps

philippe

0 Helpful