05-24-2012 02:28 AM - edited 03-10-2019 07:07 PM
Dear Friends ,
My discussion is about how to add an snmp server ip and community in the ACS 3.2 appliance .
Solved! Go to Solution.
05-29-2012 10:27 PM
As far as I can tell you cannot configure SNMP on a version 3.x appliance. I have access to v4.x and 3.x appliances. In the v4.x appliance the SNMP configuration is under System Configuration > Appliance Configuration but there is no SNMP configuration in the same area on the v3.x appliance.
05-30-2012 05:14 AM
This feature is not available in 3.x:
An upgrade to 4.x code will be required:
05-29-2012 10:27 PM
As far as I can tell you cannot configure SNMP on a version 3.x appliance. I have access to v4.x and 3.x appliances. In the v4.x appliance the SNMP configuration is under System Configuration > Appliance Configuration but there is no SNMP configuration in the same area on the v3.x appliance.
05-30-2012 05:14 AM
This feature is not available in 3.x:
An upgrade to 4.x code will be required:
05-30-2012 11:50 PM
Thanks for the suggestions
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide