cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

653
Views
0
Helpful
3
Replies

ACS 3.2 SNMP

Dear Friends ,

          My discussion is about how to add an snmp server ip and community in the ACS 3.2 appliance .

2 ACCEPTED SOLUTIONS

Accepted Solutions
rodmunch999
Beginner

As far as I can tell you cannot configure SNMP on a version 3.x appliance. I have access to v4.x and 3.x appliances. In the v4.x appliance the SNMP configuration is under System Configuration > Appliance Configuration but there is no SNMP configuration in the same area on the v3.x appliance.

View solution in original post

3 REPLIES 3
rodmunch999
Beginner

As far as I can tell you cannot configure SNMP on a version 3.x appliance. I have access to v4.x and 3.x appliances. In the v4.x appliance the SNMP configuration is under System Configuration > Appliance Configuration but there is no SNMP configuration in the same area on the v3.x appliance.

Thanks for the suggestions

Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars


Miss a previous ISE webinar?
Never miss one again!

CiscoISE on YouTube