06-17-2011 06:46 AM - edited 03-10-2019 06:10 PM
Is there a way where I can just export the clients from one server and restore them onto another?
Is tehre maybe a way to covnert the dmp file to another format, like csv, then modifying it and converting back to dmp??
thanks
Solved! Go to Solution.
06-17-2011 06:20 PM
Hello MarekVanco
You can restore AAA client by taking a backup file from original server i.e. dmp and restore only "Ciscosecure ACS system config ". It will restore only network devices.
Please note : you cannot modify .dmp file.
thanks
Devashree
06-17-2011 06:20 PM
Hello MarekVanco
You can restore AAA client by taking a backup file from original server i.e. dmp and restore only "Ciscosecure ACS system config ". It will restore only network devices.
Please note : you cannot modify .dmp file.
thanks
Devashree
06-18-2011 08:20 AM
Hi,
You can do the following:
Network configuration > AAA client > search > enter the following on the search field.
Name:*
IP address: *.*.*.*
Type:Any
Click on Search. You will get a download and you will get a .csv file.
please note this csv file will not contain the shared secret of the device.
Hope this helps.
Regards,
Anisha
P.S.: please mark this post as answered if you feel your query is resolved. Do rate helpful posts.
06-20-2011 06:38 AM
What I ended up doing was taking a full backup and restoring it on one box, then doing a devices only replication to the other box, then the 1st box did a replication of everything to the 2nd.
Iw as worried that by doing a restoral of network config would cause me to lose access to the box, but that didnt happen. at any case, I lost 13-00 devices on the original box by doing so. the search and export/import may have worked.
thanks everyone
09-11-2014 02:17 AM
Hi - is there also a way to extract the Tacacs key as part of this?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide