cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

198
Views
0
Helpful
1
Replies
Highlighted
Participant

ACS 4.2 to 5.6 Migration

Dear All.

We are having acs 4.2 which is now being migrated to 5.6. When we configure policies, we need to have multiple device groups with the different privilege level.

Like Shell profile 1--> NDG1 = Priv15 , NDG2 = Priv 7 etc 

How to write this in ACS 5.6. A user group should have different access to each NDG's. 

 

1 REPLY 1
Highlighted
Cisco Employee

Hi Prasan, I have found that the Lab Minutes videos are very useful. Have a look:

http://www.labminutes.com/video/sec/ACS

Otherwise, the end user guide is your best friend :)

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-6/user/guide/acsuserguide.html

Give those a try and let us know if you run into any issues. 

 

Thank you for rating helpful posts!