cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

4372
Views
5
Helpful
2
Replies
Highlighted
Beginner

ACS 5.1.0.44 GUI login failed!!

Dear guys,

I'm trying to setup Cisco ACS (5.1.0.44) in VMware work station for a  testing/study purpose. Installation went fine. I can login through SSH,  but GUI login failed with the same credential. Please find the attached  images.

Any help will be highly appreciated!!

_______________________________________________

login as: admin

Using keyboard-interactive authentication.

Password:

Last login: Tue Oct 30 17:31:24 2012

ACS-LAB/admin# show running-config

Generating configuration...

!

hostname ACS-LAB

!

ip domain-name testlab

!

interface GigabitEthernet 0

  ip address 10.10.10.50 255.255.255.0

!

ip name-server 8.8.8.8

!

ip default-gateway 10.10.10.254

!

clock timezone UTC

!

!

username admin password hash $1$HRi10i.R$LHqyKJWVqDxfrcmaWGPOM1 role admin

!

service sshd

!

password-policy

  lower-case-required

  upper-case-required

  digit-required

  no-username

  disable-cisco-passwords

  min-password-length 6

!

logging localhost

logging loglevel 6

!

cdp timer 60

cdp holdtime 180

cdp run GigabitEthernet 0

!

icmp echo on

!

ACS-LAB/admin#

__________________________________________________________________________-

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Hi there,

The first time you access the ACS GUI you need to use the default credentials:

Username: acsadmin

Password: default

After this the server will ask you to change the password. Please give it a try and let me know how it goes.

View solution in original post

2 REPLIES 2
Highlighted
Beginner

Hi there,

The first time you access the ACS GUI you need to use the default credentials:

Username: acsadmin

Password: default

After this the server will ask you to change the password. Please give it a try and let me know how it goes.

View solution in original post

Highlighted
Beginner

It works fine!! Thanks for your time.

Sent from Cisco Technical Support iPhone App