ACS 5.1 to 5.3 upgrade issue

[Santosh Shetty]

We have recently upgraded acs 5.1 to 5.3 ( normal upgrade process), all secondary (ACS-B) was deregistered from primary (ACS-A , used as configuration server and logg collector) and updated successfully.  But while upgrading primary acs server was rebooted manually. But later primary server was re upgraded successfully to 5.3.

    Just to ensure database is not lost on primary acs (ACS-A) , primary acs was registered to one of the secondary acs (ACS-B). Initially  ACS-A registered with ACS-B, both ACS was showing proper role now. ACS-A ( secondary ) and ACS-B (primary). But on New primary ACS (ACS-B) is showing new secondary (ACS-A) offline and replication pending. Whereas on Secondary ACS-B its shows primary ACS-A online and updated. But ACS replication id is gradually incrementing. ACS system is in this system for last 2 day, But not sure if there is real replication happening at backend? 

Do anyone have idea how long it take place to replicate completely? and how to check / verify staus of upgarde?       

[Jatin Katyal]

From the CLI of secondary instance could you please run:
show acs-logs file ACSManagement.log | i "Replication service"

Jatin Katyal

- Do rate helpful posts -

From the CLI of secondary instance could you please run:
show acs-logs file ACSManagement.log | i "Replication service"

[Santosh Shetty]

whith above command its shows failed replication logg of two days back.

tried following command

show acs-logs file ACSManagement.log | i "Apr 25 2013"

last logg is as follows

Apr 25 2013 05:18:37 CisACS_34222 165 1 1 REPLICATION Received transaction , AdminName=SERVICE, 1/ConfigTransactionID=149

Apr 25 2013 05:18:37 CisACS_34223 166 1 1 REPLICATION Applied transaction , AdminName=SERVICE, 1/ConfigTransactionID=149

[vikasyad]

Please review the below link for upgrading the Cisco ACS might be helpful:

http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.4/installation/guide/csacs_upg.html#wp1194843