This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
I need to help with accounting in ACS 5.3. When I setup accounting on WLC 440x / 5508 ACS takes them as an authentication request and fail.
Here are some logs what I see in acsview:
Dec 9,11 6:05:11.783 PM
|Radius authentication failed for USER: navrka2 MAC: a.b.c.d AUTHTYPE:|
Radius authentication failed
ACS Session ID:
Audit Session ID:
Tunnel-Type=(tag=0) VLAN, Tunnel-Medium-Type=(tag=0) 802, Tunnel-Private-Group-ID=(tag=0) XXX
11004 Received RADIUS Accounting-Request
11017 RADIUS created a new session
Evaluating Service Selection Policy
15006 Matched Default Rule
15012 Selected Access Service - DenyAccess
11019 Selected DenyAccess Service
11003 Returned RADIUS Access-Reject
Any ideas how to get this working?
Maybe you see Bug CSCts14694, Accounting requests seen as authentication requests.
But at the moment I don't know how to resolve this problem
Could you maybe post a screenshot how you created the compound condition? I've already tried but I wasn't able to manage this
before in Access Policies --> Service Selection Rules I had a rule for WLAN and in compound condition I had that Service-Type must be Framed. Because Accounting requests do not have this attribute, then the request was not matched by this rule or any other.
When I removed Framed Service Type and put it to Access Service directly it started to work.
Hope this helps.