cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

168
Views
0
Helpful
1
Replies

ACS 5.5 Radius Attribute not listed in Radius Directory

                   Hello Community,

iam on the evaluation on Cisco ACS 5.5, and iam trying some scenarios for my company.

I have to authenticate a ip phone . here i need one VLan tagged and one vlan untagged.

In the authorization profile u can add the Radius Attributes, we got hp switches and i need the attribute  with the ID-56, but this ID ist not listed in the Authorization Profiles--> Radius Attributes-->select Part.

But it is listed under system-administration->Configuration-->dictionaries-->Protocols->Radius--> Radius IETF

come somebody tell me how i can selct this Attributes under Authorization Profiles--> Radius Attributes-->select Part. ??

Thanks a lot

regards

1 REPLY 1
Muhammad Munir
Contributor

Hi

As you are using HP switches, certain advanced use cases, such as those that involve posture assessment, profiling, and web authentication, are not consistently available with non-Cisco devices or may provide limited functionality, and are therefore not supported with non-Cisco devices.

 

For more information regarding Authorization profile configuration, please go through the following link:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-5/user/guide/acsuserguide/pol_elem.html

 

Content for Community-Ad