01-22-2014 03:02 AM - edited 03-10-2019 09:18 PM
Hi All,
I have the same issue as below. Please advise.
Thanks in advance.
Regards,
Rakesh
01-22-2014 07:12 AM
Hi Guys,
Anyone encountered similar issue?? Please advise
Thanks
01-26-2014 11:53 AM
Does the Bluecoat Packetshaper require the RADIUS server to return a custom A/V pair?
You may want to approach Bluecoat and ask them for their input on this.
Javier Henderson
Cisco Systems
01-26-2014 09:12 PM
Hi Javier,
We are actually using ISE for integration. I have checked one of the documents by Cisco TAC and according to that for ACS radius authentication, they only need access=look to be sent. I have configured the same on the ISE but still same.
Regards,
Rakesh
01-28-2014 07:41 AM
Hi All,
I have configured as below in ISE. Can someone please advise from the attached image, if say I need to define static attribute of type string access=look. Is this the correct way of doing it?
Thanks
Best Regards,
Rakesh
01-30-2014 01:00 PM
Please go through the link below and can verify the configuration.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide