02-01-2011 04:15 AM - edited 03-10-2019 05:46 PM
Hi,
My ACS SE appliance 1113 is currently running with 4.1.1.23. I need to upgrade the software. Which is the latest software version available for ACS SE 1113. At max which version can I load ?
Thanks in advance
02-01-2011 04:51 AM
Hi,
You can upgrade to the latest 4.2.x version available.
Currently it is 4.2.1.15.3.
HTH,
Tiago
--
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
02-01-2011 05:29 AM
In order to upgrade it to latest version 4.2.1.15 patch 3, you first need to reimage it using 4.2.0.124 recovery CD and then you can upgrade it to 4.2.1.15.
Path should be like this
Take backup of your current config from ACS 1113 4.1.1.23
Reimage the solution engine with 1113 v4.2.0.124 recovery CD
Restore the database that you took on the 4.1.1.23
Upgrade the ACS SE to 4.2.1.15
Apply the latest patch 3
Reimaging the appliance using 4.2 recovery CD
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_e
ngine/4.2/installation/guide/solution_engine/upgap.html#wp1168438
NOTE: Using the recovery DVD to reimage your appliance erases all data on the appliance hard drive.
Hope this helps.
Rgds, Jatin
Do rate helpful posts~
02-01-2011 06:25 AM
Hi,
I am new to ACS. I have some queries.
1. How would I get the 4.2.1.15 software. how would i install it.
2. How would I get the latest Patch 3. How to install the patch.
Thanx in advance
02-01-2011 06:34 AM
Hi,
The patches are available through the CCO download section.
Regarding the main version software, you will need to open TAC case in order to get hands on the main version, as entitlement needs to be verified.
HTH,
Tiago
--
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
02-01-2011 06:54 AM
Hi Tiago,
Can you pls tell me the actual file name of patch 3. pls. let me know so that i can download the right file.
Also pls let me know the procedure to upgrade from 4.2.0.124 to 4.2.1.15.
02-12-2012 12:04 AM
that is great
however, the customer should have a valid support HW or SW contact for the appliance, if Yes, what is the part number for it ?
Thanks,
02-01-2011 07:21 AM
You may download from the below listed link
http://tools.cisco.com/squish/d4e4A
File names
applAcs_4.2.1.15.3.zip -----> for acs appliance
Acs-4.2.1.15.3-RA.zip ----> For remote agent
Rgds, Jatin
Do rate helpful posts~
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: